Item number CCARPG25
The RPG CONNECTOR CABLE 25FT is a cable/connector assembly designed for use with ZBG, ZBH, and ZLZ series devices. This 25-foot cable provides extended reach and reliable electrical connection, ensuring seamless communication and operation for these compatible systems over a greater distance.
Item number CCARPG01
The RPG CONNECTOR CABLE is specifically designed for use with ZBG, ZBH, and ZLZ series devices.This cable/connector assembly ensures a reliable electrical connection, facilitating seamless communication and operation for these compatible systems.
Item number CTL0501F
CTL Series transducers combine a current transformer and a signal conditioner into a single package. This provides higher accuracy, lower wiring costs, easier installation and saves valuable panel space. The CTL Series transducers have jumper selected current input ranges and industry standard 0-10 VDC or 4-20 mA outputs. The CTL Series is designed for application on “linear” or sinusoidal AC loads. Available in a split-core or solidcore case. Select the CTL Series for constant speed loads or On/Off loads.
Item number PWR-M12-A-9
The 9’ PWR-M12-A-9 Power Cable with IP67 Rating is designed for use with N-TRON® M12 products. This IP67 rated, shielded, straight 9-foot power cable has a M12 connector on one end and bare wire on the other. Suitable for indoor/outdoor use and direct burial, offering superior performance in harsh industrial and environmental conditions.
Item number CAT5E-M12-M12-50
The CAT5E-M12-M12-50 Shielded 50′ Cable is a durable, high performing 50-foot twisted pair cable with Straight M12 to Straight M12 connector. Meets and exceeds Cat5E specifications. Perfect for high temperature settings with cable rated for 75° C. Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX connections.
Item number CBLMUL00
The CBL MULTITECH MODEMS is a 10-foot communication cable designed to connect Graphite®, DSP, G3, or Modular Controller series devices to Multitech brand modems. Facilitates seamless data exchange and communication, enabling remote access and data transfer capabilities for your Red Lion industrial automation equipment.
Item number CAT5E-XM12-RJ45-7
The 7 ft Gigabit Shielded CAT5e cable features a secure straight X-Code M12 connector for devices and an RJ45 connector for networking. Shielded against EMI/RFI for consistent gigabit speeds in demanding environments like automation. Durable build ensures dependable long-distance connectivity.
Item number RPGMK002
Standard Tether Arm Kit, 4.5″
Item number RPGBIM01
The Inch bore insert kit Includes sleeves for 11 mm, 12 mm, and 14 mm bore diameters. Provides versatile sizing options for various applications.
Item number 2ZR6AA-3
The durable 2ZR6AA-3- 3′ Multimode Duplex Fiber Optic Cable with ST-ST connectors help add fiber capability to industrial applications. 3 feet in length, diameter of 62.5/125, wavelength of 1310nm, and maximum insertion loss of 0.4dB. Safety rated and high performing in harsh conditions from -20 to 70 °C.
Item number PMK3C000
The Model BMK3 and 4 Base Mount Kits provide the necessary equipment for base mounting various units. The kits are coated with a durable flat black polyurethane finish and consist of two mounting legs which attach to the customer’s base panel, using the hardware provided. Model PMK3 and 4 are separate front panels, available for different sized units. After mounting the units to the appropriate PMK panel, the entire assembly is then attached to the mounting legs.
Item number 2ZR6CC-3
The durable 2ZR6CC-3 – 3′ Multimode Duplex Fiber Optic Cable with LC-LC connectors help add fiber capability to industrial applications. 3 feet in length, diameter of 62.5/125, wavelength of 850nm, and maximum insertion loss of 0.4dB. Safety rated and high performing in harsh conditions from -20 to 70 °C.
Item number CBLSIE08
The G3/MC-SIE-CP525 COMM CARD cable provides a 10-foot connection between Graphite®, Data Station Plus (DSP), or G3 Modular Controller units and Siemens PLCs utilizing the CP525 communication card.
Item number CBLGEF01
The CBL GE FANUC 90S V SNP is a 10-foot communication cable designed to establish a connection between Graphite®, DSP, G3, or Modular Controller series devices and a GE Fanuc 90 Series programmable logic controller using the SNP protocol. Facilitates seamless data exchange and communication between these industrial control components.
Item number CBLSIE09
The SIEMENS CABLE S5 provides a direct connection between Graphite®, Data Station Plus (DSP), or G3 Modular Controller devices and Siemens S5 series Programmable Logic Controllers. This cable facilitates seamless communication for data exchange and control.
Item number CAT5E-XAM12-RJ45-14
The 14ft Gigabit Shielded CAT5e cable is engineered for reliable high-speed data transfer in industrial and outdoor settings. It features a robust, space-efficient 115-degree angled X-Code M12 connector, ensuring secure connections to standard RJ45 ports
Item number CBLAB002
The CBL AB PLC-5 V CHNL 0 is a 10-foot communication cable designed to establish a connection between Graphite®, DSP, G3, or Modular Controller series devices and an Allen Bradley PLC-5 programmable logic controller via its Channel 0 port. Facilitates seamless data exchange and communication between these industrial control components.
Item number CAT5E-XM12-XM12-328
The 328ft shielded Gigabit CAT5e cable features secure straight X-Code M12 connectors on both ends for direct device-to-device connections. Shielded against EMI/RFI for consistent high-speed data in demanding environments. Durable construction ensures dependable long-distance M12 connectivity.
Item number CAT5E-XAM12-RJ45-3
The 3ft Gigabit Shielded CAT5e cable is engineered for reliable high-speed data transfer in industrial and outdoor settings. It features a robust, space-efficient 115-degree angled X-Code M12 connector, ensuring secure connections to standard RJ45 ports.
Item number CAT5E-XM12-XAM12-100
The 100ft shielded Gigabit CAT5e cable provides a robust, high-speed connection for industrial devices. Featuring a straight X-Code M12 connector and a space-saving 115-degree angled X-Code M12, it offers flexible routing in tight setups. Shielding ensures reliable gigabit data transfer between M12 ports by minimizing EMI/RFI. Ideal for short, secure links.
Item number 2ZR6AA-18
The durable 2ZR6AA-18- 18′ Multimode Duplex Fiber Optic Cable with ST-ST connectors help add fiber capability to industrial applications. 18 feet in length, diameter of 62.5/125, wavelength of 1310nm, and maximum insertion loss of 0.4dB. Safety rated and high performing in harsh conditions from -20 to 70 °C.
Item number ANT-MA520ABC008
The Antenna 2G/3G and Wi-Fi is a low-profile combo solution delivering penta-band cellular (HSPA/GSM/GPRS/CDMA/EVDO/UMTS/WCDMA) and dual-band 2.4/5GHz Wi-Fi connectivity. Its compact, waterproof (IP67) screw-mount design (49mm dia, 29mm high) is ideal for space-constrained applications. Featuring a 9ft RG-174 cable terminated with a versatile SMA(M) connector, this antenna offers reliable multi-network performance in a durable, discreet package
Item number 2ZR6AC-100
The durable 2ZR6AC-100 – 100′ Multimode Duplex Fiber Optic Cable with ST-LC help add fiber capability to industrial applications. 100 feet in length, diameter of 62.5/125, wavelength of 1310nm, and maximum insertion loss of 0.4dB. Safety rated and high performing in harsh conditions from -20 to 70 °C.
Item number CAT5E-XM12-RJ45-250
The 250ft Gigabit Shielded CAT5e cable features a secure straight X-Code M12 connector for devices and an RJ45 connector for networking. Shielded against EMI/RFI for consistent gigabit speeds in demanding environments like automation. Durable build ensures dependable long-distance connectivity.
Foldable cellular antenna to be mounted on Ewon Cosy+
Item number FAC91401_0000
This foldable cellular antenna is compatible with 4G/3G/2G/LPWA bands for Ewon Cosy+ 4G Japan and APAC (EC7133N_00MA, EC7133M_00MA). Featuring high efficiency and gain, it is an ideal omni-directional antenna solution to ensure high-speed data transmission.
Configurable automotive platform (1x EtherCAT, 1x FlexRay, 8x CAN, thereof 4x CAN FD)
Item number 1.13.0094.10407
The Ixxat FRC-EP190 Max EtherCAT is a powerful and versatile solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers EtherCAT, FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x FlexRay, 4x CAN)
Item number 1.13.0142.00002
The Ixxat FRC-EP170 is an advanced solution for automotive engineering that integrates multiple bus systems. It features four CAN channels, one of which is CAN low-speed capable, including FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x EtherCAT, 8x CAN, thereof 4x CAN FD)
Item number 1.01.0091.00110
The Ixxat CANnector LE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in/out and eight CAN channels, four of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x FlexRay, 8x CAN, thereof 4x CAN FD)
Item number 1.13.0094.10507
The Ixxat FRC-EP190 FlexRay Plus 4 is a powerful solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (8x CAN, thereof 4x CAN FD)
Item number 1.13.0094.10107
The Ixxat FRC-EP190 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based applications. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers LIN, Digital in/out, and Analog in functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x EtherCAT, 6x CAN, thereof 2x CAN FD)
Item number 1.01.0091.00100
The Ixxat CANnector SE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in/out and six CAN channels, two of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (4x CAN)
Item number 1.13.0142.01002
The Ixxat FRC-EP170 CANonly is a compact solution for automotive uses, focusing on CAN-based operations. It features four CAN channels, one of which is CAN low-speed capable, including LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (8x CAN, thereof 4x CAN FD)
Item number 1.01.0091.00010
The Ixxat CANnector L is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN, two Digital in/out and eight CAN channels, four of which are CAN FD capable. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (6x CAN, thereof 2x CAN FD)
Item number 1.01.0091.00000
The Ixxat CANnector S is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN, two Digital in/out and six CAN channels, two of which are CAN FD capable. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (6x CAN, thereof 2x CAN FD)
Item number 1.13.0142.01302
The Ixxat FRC-EP170 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based operations. It features six CAN channels, thereof two CAN FD and one CAN low-speed capable, including LIN and Digital in/out functionalities. This makes it ideal for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (2 x Automotive Ethernet, 8 x CAN/CAN FD, 2 x LIN, and more)
Item number 1.01.0143.08201
The Ixxat Mobilizer Pro 820/EtherCAT is a powerful and versatile solution for automotive uses, integrating Automotive Ethernet, LIN, Sent, K-Line, EtherCAT and eight CAN FD interfaces. It’s ideal for logging, gateway, and rest bus simulation tasks – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (2 x Automotive Ethernet, 8 x CAN/CAN FD, 2 x LIN, and more)
Item number 1.01.0143.08201
The Ixxat Mobilizer Pro 820/EtherCAT is a powerful and versatile solution for automotive uses, integrating Automotive Ethernet, LIN, Sent, K-Line, EtherCAT and eight CAN FD interfaces. It’s ideal for logging, gateway, and rest bus simulation tasks – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (8 x CAN/CAN FD, 2 x LIN, and more)
Item number 1.01.0143.08000
The Ixxat Mobilizer Standard 800 is a powerful and versatile solution for automotive uses, integrating two LIN and eight CAN FD interfaces. It’s ideal for logging, gateway, and rest bus simulation tasks – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
CAN/CAN FD repeater with fiber optics
Item number 1.01.0210.11220
The Ixxat CAN-CR110/FO repeater with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures.
CAN/CAN FD repeater with 3 kV galvanic isolation and termination resistor
Item number 1.01.0210.20010
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. With integrated termination resistors.
CAN repeater with 4 kV DC/4 kV AC galvanic isolation
Item number 1.01.0067.44300
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV DC/4 kV AC for 1 second, enhancing the protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
CAN/CAN FD repeater with screw terminals and termination resistor
Item number 1.01.0210.20000
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
CAN repeater with 4 kV DC/3.5 kV AC galvanic isolation
Item number 1.01.0067.44400
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV DC/3.5 kV AC for 1 second, enhancing the protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
CAN repeater with fiber optics (ST) and backbone bus
Item number 1.01.0068.46010
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (ST plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
CAN repeater with fiber optics (F-SMA) and backbone bus
Item number 1.01.0068.45010
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (FSMA plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
CAN Bluetooth bridge and PC interface with internal antenna
Item number 1.01.0126.12000
The Ixxat CANblue II is a versatile and cost-effective Bluetooth module for CAN systems that is equipped with an internal antenna. It offers three operation modes: PC interface, bridge, and gateway, making it suitable for various application areas. It is ideal for mobile configuration, analysis, and conveniently bridging CAN networks via Bluetooth.
CAN Bluetooth bridge and PC interface (external antenna)
Item number 1.01.0126.12001
The Ixxat CANblue II is a versatile and cost-effective Bluetooth module for CAN systems that can be used with an external antenna. It offers three operation modes: PC interface, bridge, and gateway, making it suitable for various application areas. It is ideal for mobile configuration, analysis, and conveniently bridging CAN networks via Bluetooth.
CAN/CAN FD repeater with 3 kV galvanic isolation
Item number 1.01.0210.20210
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures.
CAN/CAN FD repeater with four channels
Item number 1.01.0210.40200
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
Item number 1.01.0210.40000
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
Item number 1.01.0332.42000
The Ixxat CAN@net NT 420 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features four CAN channels, thereof two CAN FD capable, and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Item number 1.01.0210.11020
The Ixxat CAN-CR110/FO repeater with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
Item number 1.01.0261.02106
The Ixxat CME/PN is a powerful and easily configurable gateway for connecting CANopen devices and networks to PROFINET systems. It enables seamless system integration and bidirectional data exchange, while offering easy configuration via USB or Ethernet. This makes it a flexible, cost-effective solution for CANopen to PROFINET connectivity.
Item number 1.01.0332.20000
The Ixxat CAN@net NT 200 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features two CAN channels and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Intelligent CAN-to-CAN bridge
Item number 1.01.0331.20000
The Ixxat CANbridge NT 200 is a configurable CAN to CAN bridge/router to connect different CAN systems. It offers two CAN channels and supports long-distance communication, with several message processing and multiplexing functionalities. Ideal for efficient network management and system expansion.
CAN/CAN FD repeater with push-in connectors and termination resistor
CAN/CAN FD repeater with push-in connectors and termination resistor
Item number 1.01.0211.20000
The Ixxat CAN/FD Repeater Standard with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems, and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
PC interface card for CAN (1 x CAN)
Item number 1.01.0233.11000
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with one CAN channel. It is an easy and very cost-efficient way to connect computers to a CAN bus network, enabling simple integration into diverse industrial setups, supporting various CAN applications.
Connects computers and embedded systems to industrial Ethernet networks
Item number 1.01.0340.20100
The Ixxat INpact CE Slave PCIe Mini is a versatile and efficient solution to connect embedded systems and PCs to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable Industrial Ethernet protocols, enabling flexible multi-network communication in a compact PCIe Mini format.
Connects computers and embedded systems to industrial Ethernet networks
Item number 1.01.0340.20100
The Ixxat INpact CE Slave PCIe Mini is a versatile and efficient solution to connect embedded systems and PCs to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable Industrial Ethernet protocols, enabling flexible multi-network communication in a compact PCIe Mini format.
PC interface card for CAN (1 x CAN), top-entry, galv. isolated
Item number 1.01.0237.90001
The Ixxat CAN-IB120/PCIe Mini is a passive PCI Express Mini interface card with one CAN channel, galvanic isolation and top-entry CAN socket. It is an easy and cost-efficient way to connect computers to a CAN bus network. Thanks to its very compact dimensions, the card is especially suitable for applications with limited space.
