PCAN-T-Adapter
Add another node to a running CAN or CAN FD bus
PCAN-T-Adapter puts a branch into an existing CAN bus. It taps the data lines and ground and brings them out on a short tap cable with its own D-Sub socket, ready for one more CAN node.
The tap has no termination, so the bus keeps its termination at the two ends. There are two housings: PCAN-T-Adapter in a plastic case and PCAN-Mini-T-Adapter in a molded body. Both work on CAN FD buses.
Highlights
- D-Sub socket in, D-Sub connector and D-Sub socket out (CiA 106)
- Tap cable of about 20 cm
- No termination
- Plastic case or molded body
- Usable on CAN FD buses
Versions and order numbers
- IPEK-003003: PCAN-T-Adapter, plastic case
- IPEK-003003-Mini: PCAN-Mini-T-Adapter, molded body
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEK-003003, IPEK-003003-Mini |
| Connectors | 9-pin D-Sub socket to 9-pin D-Sub connector and 9-pin D-Sub socket (CiA 106) |
| Tap length | About 20 cm (cable color on the PCAN-T-Adapter may vary) |
| Termination | None |
| Housing | PCAN-T-Adapter: plastic case. PCAN-Mini-T-Adapter: molded body |
| CAN FD | Suitable |
In the Box
- PCAN-T-Adapter or PCAN-Mini-T-Adapter, in the version ordered
Combine it with PCAN-Cable 1 for the bus segments and the PCAN-Term at both ends.
For quantities, lead time or a quote, contact Pertech.
