PCAN-Chip PCIe FD
Put up to four CAN FD channels on PCI Express in your own board design
PCAN-Chip PCIe FD is a licensed FPGA image that turns an FPGA on your own board into a CAN FD controller on the PCI Express bus. Depending on the licence it gives you two or four CAN channels.
Because the result behaves like a PEAK PCI Express interface, the standard PEAK drivers for Windows and Linux, PCAN-View and the PCAN-Basic API work with it unchanged. PEAK supplies the integration documentation and a sample circuit diagram.
Highlights
- FPGA-based CAN FD controller for PCI Express x1
- Two-channel or four-channel licence
- CAN 2.0 A/B and CAN FD, ISO and Non-ISO selectable
- Bus master DMA with 32-bit and 64-bit addressing
- Bus load measurement and error generation
- Works with the standard PEAK drivers and software
Versions
- PCI Express 2 Channel licence
- PCI Express 4 Channel (Quad) licence
- PEAK does not publish an order number for this product: contact us and we will arrange the licence with PEAK
Key Specifications
| Spec | Value |
|---|---|
| Type | Licensed FPGA configuration image |
| Host bus | PCI Express x1, up to 2.5 Gbit/s |
| CAN channels | 2 or 4, depending on the licence |
| CAN standards | CAN 2.0 A/B and CAN FD (ISO and Non-ISO, switchable) |
| Data transfer | Bus master DMA, 32-bit and 64-bit addresses |
| Diagnostics | Bus load including error and overload frames; induced error generation |
| Software compatibility | PEAK PCI Express drivers and software |
In the Box
- Licence for the FPGA configuration image (2 or 4 channels)
- Device drivers for Windows 11 (x64), 10 (x64) and Linux
- PCAN-View CAN monitor for Windows
- PCAN-Basic API
- Programming interfaces for standard automotive protocols
- Wiring and integration documentation with a sample circuit diagram
For a finished plug-in card, see the PCAN-PCI Express FD; for a USB-based design, the PCAN-Chip USB.
For quantities, lead time or a quote, contact Pertech.
