PCAN-PCI Express FD
Isolated CAN FD channels for desktop and industrial PCs
PCAN-PCI Express FD is a PCIe x1 plug-in card that connects a PC to CAN FD and classic CAN networks. It comes with one, two or four channels.
Each channel is galvanically isolated from the computer up to 500 V and has its own solder-jumper termination. The FPGA-based controller moves data by bus master DMA, measures bus load including error frames and can generate errors on purpose for testing.
Highlights
- 1, 2 or 4 CAN FD channels on PCIe x1
- Galvanic isolation up to 500 V per channel
- CAN FD up to 12 Mbit/s, ISO and Non-ISO
- Bus master DMA with 32-bit and 64-bit addressing
- Bus load measurement and error generation
- -40 to 85 C operating range
Versions
- IPEH-004026: PCAN-PCI Express FD Single Channel
- IPEH-004027: PCAN-PCI Express FD Dual Channel
- IPEH-004040: PCAN-PCI Express FD Four Channel
Software
- Device drivers for Windows 11 (x64) and 10 (x64), and for Linux
- PCAN-View, a CAN monitor for Windows
- PCAN-Basic, the API for writing your own CAN applications
- Programming interfaces for standard automotive protocols
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEH-004026 (1 ch.), IPEH-004027 (2 ch.), IPEH-004040 (4 ch.) |
| Bus | PCI Express x1 |
| CAN standards | CAN 2.0 A/B and CAN FD, ISO and Non-ISO switchable |
| Bit rates | CAN 25 kbit/s to 1 Mbit/s; CAN FD data 25 kbit/s to 12 Mbit/s |
| Connector | D-Sub 9-pin (CiA 106) |
| Transceiver | NXP TJA1044GT |
| Isolation | Up to 500 V, separate for each channel |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-PCI Express FD card (1, 2 or 4 channels, as ordered)
- Slot bracket with D-Sub connectors (four-channel version only)
- Device drivers for Windows 11 (x64), 10 (x64) and Linux
- PCAN-View and PCAN-Basic
- Programming interfaces for standard automotive protocols
- Manual (PDF)
For classic CAN only, see the PCAN-PCI Express; for embedded boards, the PCAN-M.2.
For quantities, lead time or a quote, contact Pertech.
