PCAN-Cable OBD-2
Reach the CAN lines of a vehicle OBD-2 port with a PEAK interface
Most current cars have an OBD-2 port where diagnostic and test equipment plugs in. PCAN-Cable OBD-2 brings the CAN signals from that port to a 9-pin D-Sub socket, so a PEAK CAN interface can connect to the vehicle directly.
As supplied, only pins 6 and 14 of the OBD-2 plug carry signals: CAN-High and CAN-Low per J-2284. All OBD-2 contacts are fitted in the plug, so you can wire other pins yourself if your setup needs them.
Highlights
- OBD-2 plug to 9-pin D-Sub socket (CiA 106)
- CAN-High on pin 6, CAN-Low on pin 14 (J-2284)
- All OBD-2 contacts fitted, free to assign
- 1.0 m length, no termination resistors
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEK-003004 |
| Vehicle side | OBD-2 connector, all pins fitted |
| OBD-2 pin assignment | Pin 6: CAN-High (J-2284). Pin 14: CAN-Low (J-2284). Other pins not assigned |
| Interface side | 9-pin D-Sub socket (CiA 106) |
| Length | 1.0 m |
| Termination | None |
In the Box
- PCAN-Cable OBD-2
It suits PEAK CAN interfaces such as the PCAN-USB and PCAN-USB FD. For heavy-duty vehicles with a DEUTSCH diagnostic port, see the PCAN-Cable J1939.
For quantities, lead time or a quote, contact Pertech.
