Advanced Cable Tester v2 Module: HDMI-A to HDMI-A – TP821010
Test HDMI cables on the Advanced Cable Tester v2
This connector module fits the Total Phase Advanced Cable Tester v2 and lets it test HDMI cables. You plug the module into the tester, connect the cable under test to the module’s receptacles (2 x HDMI Type-A) and run the test from the tester’s software.
Modules swap in and out, so one tester covers every cable type you build or buy. Each module is rated for 5,000 tests, and the tester keeps count of the insertions so you know when to replace it.
Highlights
- Receptacles: 2 x HDMI Type-A
- Tests HDMI Category 1, 2 and 3 profiles, with or without HEAC
- Rated for 5,000 tests; insertion count tracked by the tester
- Swaps in and out of the ACT v2
What It Tests
- HDMI Category 1, 2 and 3 profiles, with or without HEAC: continuity, DC resistance (except the high-speed lines), signal integrity up to 12.8 Gbps per channel
Key Specifications
| Spec | Value |
|---|---|
| Part number | TP821010 |
| Receptacles | 2 x HDMI Type-A |
| Works with | Total Phase Advanced Cable Tester v2 only (proprietary finger-style connector) |
| Rated life | 5,000 tests without test degradation; the tester counts insertions |
| Warranty | 90 days or 1,000 insertions, whichever comes first |
| Operating temperature | 10 to 35 C |
| Size and weight | About 7 5/8 x 1 1/2 x 1 3/8 in., about 90 g |
| Compliance | REACH, RoHS, China RoHS |
In the Box
- HDMI-A to HDMI-A connector module
The module needs the Advanced Cable Tester v2; the test software comes with the tester.
Other ACT v2 modules from Pertech: USB Type-C to Type-C, USB Type-C to Standard-A, USB Type-C to USB 3.1 Micro-B, USB 3.1 Standard-A to Micro-B, USB 3.1 Standard-A to Standard-B, USB Type-C to USB 3.1 Standard-B, DisplayPort to DisplayPort.
For quantities, lead time or a quote, contact Pertech.
