Advanced Cable Tester v2 Module: DisplayPort to DisplayPort – TP821110
Test DisplayPort cables on the Advanced Cable Tester v2
This connector module fits the Total Phase Advanced Cable Tester v2 and lets it test DisplayPort cables. You plug the module into the tester, connect the cable under test to the module’s receptacles (2 x DisplayPort) and run the test from the tester’s software.
Modules swap in and out, so one tester covers every cable type you build or buy. Each module is rated for 5,000 tests, and the tester keeps count of the insertions so you know when to replace it.
Highlights
- Receptacles: 2 x DisplayPort
- Tests DisplayPort 1.4 and earlier
- Rated for 5,000 tests; insertion count tracked by the tester
- Swaps in and out of the ACT v2
What It Tests
- DisplayPort 1.4 and earlier: continuity, DC resistance (except the high-speed lines), signal integrity up to 12.8 Gbps per channel
Key Specifications
| Spec | Value |
|---|---|
| Part number | TP821110 |
| Receptacles | 2 x DisplayPort |
| Works with | Total Phase Advanced Cable Tester v2 only (proprietary finger-style connector) |
| Rated life | 5,000 tests without test degradation; the tester counts insertions |
| Warranty | 90 days or 1,000 insertions, whichever comes first |
| Operating temperature | 10 to 35 C |
| Size and weight | About 7 5/8 x 1 1/2 x 1 3/8 in., about 90 g |
| Compliance | REACH, RoHS, China RoHS |
In the Box
- DisplayPort to DisplayPort connector module
The module needs the Advanced Cable Tester v2; the test software comes with the tester.
Other ACT v2 modules from Pertech: USB Type-C to Type-C, USB Type-C to Standard-A, USB Type-C to USB 3.1 Micro-B, USB 3.1 Standard-A to Micro-B, USB 3.1 Standard-A to Standard-B, USB Type-C to USB 3.1 Standard-B, HDMI-A to HDMI-A.
For quantities, lead time or a quote, contact Pertech.
