Ronetix PEEDI Flash Programmer is a JTAG, SWD and BDM flash programmer for development and production. It programs NOR, NAND, SPI flash, eMMC, EEPROM and MCU on-chip flash, from a telnet or serial console at your desk, or standalone on a production line with up to 15 images on an SD card and two front-panel buttons. It is the PEEDI emulator without the debugger, and it can be upgraded to the full emulator at any time. Pertech is a Ronetix distributor.
PEEDI Flash Programmer highlights
- Programs through JTAG, SWD or BDM
- NOR, SPI NOR, DataFlash, NAND, OneNAND, eMMC, MMC/SD, I2C EEPROM, FPGA/CPLD and MCU flash
- Standalone: up to 15 images on SD card, chosen on the front panel, no PC needed
- Auto-program when target power is detected
- Images from TFTP, FTP, HTTP or SD card; telnet, serial and TCL scripting
- Up to 4 targets at once with a multi-programming license
- Upgradeable to the PEEDI Emulator and Flash Programmer
Where the PEEDI Flash Programmer fits
- Production lines that program flash or eMMC on assembled boards
- Programming boot loaders such as U-Boot into a new board
- Field service and rework stations
- Teams that need programming now and may need debugging later
Key Specifications
| Spec | Value |
|---|---|
| Model | PEEDI JTAG/SWD/BDM Flash Programmer |
| Interfaces | JTAG, SWD, BDM |
| Debugger | None (upgradeable to the Emulator version) |
| JTAG/BDM clock | Up to 33 MHz JTAG (22 MHz BDM), adaptive clocking |
| Target voltage | Autosense, 1.2 V to 5 V |
| Host connection | Ethernet 10/100BASE-T; RS232 for setup |
| Flash devices | NOR (with and without CFI), SPI NOR and SPI DataFlash, NAND with various ECC methods, OneNAND, MMC/SD and eMMC, I2C EEPROM, FPGA/CPLD (JBC player), on-chip flash of many MCUs |
| Image sources | TFTP, FTP or HTTP server, or the MMC/SD card |
| Control | Telnet or serial command line, TCL scripts, front panel |
| Multi-target | Up to 4 target boards per adapter with a multi-programming license |
| Front panel | 2 buttons and a 7-segment LED; status LEDs for power, target power, Ethernet and JTAG/BDM |
| Image storage | MMC/SD card, up to 15 images selectable on the front panel |
| Power | 5 V / 1 A; 6.9 V overvoltage shutdown |
| Case | Aluminium, 115 x 105 x 34 mm, 270 g |
| Warranty | Hardware 3 years, software 1 year |
Frequently asked questions
What is the PEEDI Flash Programmer?
It is the Ronetix PEEDI hardware with the flash-programming functions only. It programs flash through JTAG, SWD or BDM, from a console during development or standalone on a production line.
How does it differ from the PEEDI Emulator?
It has no source-level debugger support, so it cannot be used with GDB. Everything else, including standalone programming and the supported flash devices, is the same. See the PEEDI JTAG/SWD/BDM Emulator and Flash Programmer.
Can I upgrade it to the Emulator later?
Yes. Ronetix states that a PEEDI Flash Programmer can be upgraded to the Emulator and Flash Programmer at any time.
How does standalone production programming work?
Copy up to 15 images to the MMC/SD card. The operator picks an image with the front-panel buttons and PEEDI programs the board without a PC. It can start automatically when it detects target power.
Can it program several boards at once?
Yes, up to four targets, with a multi-programming license and a multicore adapter.
Which flash devices can it program?
NOR flash with or without CFI, SPI NOR and DataFlash, NAND with various ECC methods, OneNAND, MMC/SD and eMMC, I2C EEPROM, FPGA/CPLD through a JBC player, and the on-chip flash of many MCUs from NXP, ST, Microchip, Renesas, Nordic, TI and others.
Where can I buy it in Israel?
Pertech is a Ronetix distributor in Israel. Contact Pertech for a quote, the right adapter and a production setup that fits your line.
Related Ronetix products at Pertech
- PEEDI JTAG/SWD/BDM Emulator and Flash Programmer
- iMX7-CM SoM with NXP i.MX7D
- RNX-OSM-CARRIER v2.0 production test board
- Ronetix products at Pertech
Setting up production programming? Contact Pertech for a quote or help planning the setup.
