PCAN-MicroMod FD Digital 1&2
Configurable CAN FD modules for digital switching, PWM and sensing
The PCAN-MicroMod FD Digital 1 and Digital 2 are ready-to-use motherboards with a PCAN-MicroMod FD plugged in, in an aluminium casing with spring terminals. They concentrate on protected digital inputs and outputs: Digital 1 switches its outputs on the low side, Digital 2 on the high side.
You map the I/O to CAN IDs and add processing function blocks in the supplied Windows software, then transfer the setup over CAN. Each module then works as an independent CAN node, and several can share a bus with separate settings. CANopen firmware is available as an alternative.
Highlights
- 8 digital inputs, pull-up or pull-down configurable
- 8 digital outputs: low-side (Digital 1) or high-side (Digital 2)
- PWM mode with 16-bit duty cycle, 0 to 20 kHz
- 2 low-side frequency outputs and 3 analog inputs 0 to 10 V
- CAN FD data phase up to 10 Mbit/s, switchable termination
- Aluminium casing, 8 to 30 V, -40 to 85 C
Versions
- IPEH-003083: PCAN-MicroMod FD Digital 1, low-side outputs
- IPEH-003084: PCAN-MicroMod FD Digital 2, high-side outputs
Software
- PCAN-MicroMod FD Configuration for Windows: map I/O to CAN IDs and add function blocks that process the data
- Windows development package with GCC ARM Embedded and programming examples
- PEAK-Flash for Windows 11 (x64/ARM64) and Windows 10 (x64), for firmware updates
- CANopen firmware as an alternative, licensed through PEAK partner Embedded Systems Academy
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEH-003083 (Digital 1), IPEH-003084 (Digital 2) |
| CAN | High-speed CAN (ISO 11898-2), CAN 2.0 A/B and FD; switchable termination |
| Bit rates | CAN FD data field 20 kbit/s to 10 Mbit/s; CAN 20 kbit/s to 1 Mbit/s |
| Digital I/O | 8 inputs (pull-up or pull-down); 8 outputs, low-side or high-side, PWM 16-bit duty cycle, 0 to 20 kHz |
| Frequency outputs | 2 low-side switches, 0 to 20 kHz |
| Analog inputs | 3 x 12-bit, 0 to 10 V; 1 x 12-bit supply monitoring up to 30 V |
| Indicators and ID | 3 status LEDs; 4-bit rotary coding switch |
| Supply | 8 to 30 V |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-MicroMod FD (Digital 1 or Digital 2 as ordered)
- PCAN-MicroMod FD motherboard in aluminium casing with mating connectors (Phoenix Contact FMC 1,5/10-ST-3,81, 1748053 and DFMC 1,5/11-ST-3,5, 1790195)
- PCAN-MicroMod FD Configuration for Windows
- Windows development package with GCC ARM Embedded and examples
- PEAK-Flash for Windows
- Manual (PDF)
The plug-in module on its own is the PCAN-MicroMod FD; the analog version is the PCAN-MicroMod FD Analog 1.
Setting up the module over CAN needs a PEAK CAN interface such as the PCAN-USB FD or the PCAN-USB.
For quantities, lead time or a quote, contact Pertech.
