PCAN-MicroMod FD Analog 1
Configurable CAN FD module built around analog inputs and outputs
The PCAN-MicroMod FD Analog 1 is a ready-to-use motherboard with a PCAN-MicroMod FD plugged in, housed in an aluminium casing with spring terminals for CAN, I/O and supply. Its focus is analog: protected 16-bit inputs with selectable ranges, extra 0 to 10 V inputs and adjustable analog outputs.
In the supplied Windows software you map I/O to CAN IDs and add function blocks that process the data, then send the configuration over CAN. The module runs as an independent CAN node, and several modules can be configured separately on one bus. CANopen firmware is an alternative.
Highlights
- 8 analog inputs, 16-bit, ranges +/-2.5, 5, 10 or 20 V
- 4 analog inputs 0 to 10 V and 4 analog outputs 0 to 5 or 0 to 10 V, 12-bit
- 2 low-side frequency outputs, 0 to 20 kHz
- CAN FD data phase up to 10 Mbit/s, switchable termination
- Rotary switch sets the module ID
- Aluminium casing, 8 to 30 V, -40 to 85 C
Software
- PCAN-MicroMod FD Configuration for Windows: map I/O to CAN IDs and add function blocks that process the data
- Windows development package with GCC ARM Embedded and programming examples
- PEAK-Flash for Windows 11 (x64/ARM64) and Windows 10 (x64), for firmware updates
- CANopen firmware as an alternative, licensed through PEAK partner Embedded Systems Academy
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-003087 |
| CAN | High-speed CAN (ISO 11898-2), CAN 2.0 A/B and FD; switchable termination |
| Bit rates | CAN FD data field 20 kbit/s to 10 Mbit/s; CAN 20 kbit/s to 1 Mbit/s |
| Analog inputs | 8 x 16-bit (+/-2.5, 5, 10 or 20 V); 4 x 12-bit (0 to 10 V); 1 x 12-bit supply monitoring up to 30 V |
| Analog outputs | 4 x 12-bit, 0 to 5 V or 0 to 10 V |
| Digital | 4 digital inputs (pull-up or pull-down); 2 low-side frequency outputs 0 to 20 kHz |
| Indicators and ID | 3 status LEDs; 4-bit rotary coding switch |
| Supply | 8 to 30 V |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-MicroMod FD
- PCAN-MicroMod FD motherboard in aluminium casing with mating connectors (Phoenix Contact FMC 1,5/10-ST-3,81, 1748053 and DFMC 1,5/11-ST-3,5, 1790195)
- PCAN-MicroMod FD Configuration for Windows
- Windows development package with GCC ARM Embedded and examples
- PEAK-Flash for Windows
- Manual (PDF)
The plug-in module on its own is the PCAN-MicroMod FD; the digital version is the PCAN-MicroMod FD Digital 1&2.
Setting up the module over CAN needs a PEAK CAN interface such as the PCAN-USB FD or the PCAN-USB.
For quantities, lead time or a quote, contact Pertech.
