PCAN-Ethernet Gateway FD DR
Reach CAN FD buses over your IP network, or link them through it
PCAN-Ethernet Gateway FD DR gives access to classic CAN and CAN FD buses over an IP network. CAN frames are packed into TCP or UDP packets, so two or more gateways can also join distant CAN buses through the network.
It has two CAN FD channels and a Gigabit LAN port, driven by a TI AM5716 Sitara processor. You set it up and monitor it in a web interface, or from your own software through a JSON interface, covering interfaces, forwarding rules and filters.
Highlights
- Two CAN FD channels, up to 10 Mbit/s data rate
- 10/100/1000 Mbit/s LAN, TCP or UDP
- Web interface and JSON interface
- CAN channels isolated up to 500 V
- DIN rail casing, 45.2 mm wide
- 8 to 30 V supply, -40 to 70 C
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-004012 |
| CAN | 2 x High-speed CAN (ISO 11898-2), CAN 2.0 A/B and CAN FD |
| Bit rates | CAN 20 kbit/s to 1 Mbit/s; CAN FD data 20 kbit/s to 10 Mbit/s |
| Transceiver | Microchip MCP2558FD |
| LAN | 10/100/1000 Mbit/s, RJ-45 with status LEDs |
| Isolation | Up to 500 V between CAN channels, RS-232 and supply |
| Connections | Phoenix 4-pole screw terminals for CAN, RS-232 and power; PCIe Mini slot, USB and RS-232 reserved for future use |
| Supply | 8 to 30 V |
| Operating temperature | -40 to 70 C, fan cools above a temperature limit |
In the Box
- PCAN-Ethernet Gateway FD DR in DIN rail plastic casing
- Mating connectors for both CAN channels, RS-232 and power
- RJ-45 patch cord, 2 m
- Manual (PDF) and printed quick start guide
For classic CAN, see the PCAN-Ethernet Gateway DR. The PCAN-Adapter D-Sub for DR Products adds D-Sub connectors.
For quantities, lead time or a quote, contact Pertech.
