PCAN-Chip USB
A ready CAN FD to USB stamp module for your own PCB
PCAN-Chip USB is a 25 x 20 mm stamp module that gives a custom board a CAN FD channel over High-speed USB 2.0. The CAN FD controller runs in an on-module FPGA; you choose the physical CAN layer with your own external wiring.
The module is mounted on one side and has plated half-holes, so it suits automatic assembly. Each chip carries a licence for the PEAK drivers, PCAN-View and PCAN-Basic, and an optional evaluation board helps you get your first design running.
Highlights
- CAN 2.0 A/B and CAN FD over High-speed USB 2.0
- Stamp module, 25 x 20 mm, for automatic placement
- 5 digital I/Os and 1 analog input via PCAN-Basic
- Bus load measurement and error generation
- -40 to 85 C operating range
- Driver and software licence included per chip
Versions
- IPEH-004025: PCAN-Chip USB stamp module (cut tape or reel, depending on quantity)
- IPEH-004025-EVAL: PCAN-Chip USB Eval, evaluation board with the module fitted, D-Sub CAN connector (NXP TJA1044GT transceiver), USB Type-B and USB cable
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-004025 (module), IPEH-004025-EVAL (evaluation board) |
| Host interface | High-speed USB 2.0 (compatible with USB 1.1 and 3.0) |
| CAN standards | CAN 2.0 A/B and CAN FD (ISO and Non-ISO, switchable) |
| I/O | 5 digital I/Os, 1 analog input, 2 status LED outputs |
| Supply | 3.3 V DC |
| Size | 25 x 20 mm |
| Operating temperature | -40 to 85 C |
| Firmware update | Via USB |
In the Box
- PCAN-Chip USB stamp module
- Wiring and integration documentation with a sample circuit diagram
- Per-chip licence: device drivers for Windows 11 (x64/ARM64), 10 (x64) and Linux
- PCAN-View CAN monitor and PCAN-Basic API
- Programming interfaces for standard automotive protocols
For PCI Express designs, see the PCAN-Chip PCIe FD. A finished USB adapter is the PCAN-USB FD.
For quantities, lead time or a quote, contact Pertech.
