PCAN-Cable 3
CAN-High and CAN-Low on banana plugs for your measuring gear
PCAN-Cable 3 takes the two halves of the differential CAN signal, CAN-High and CAN-Low, from a CAN bus or straight from a CAN interface and brings them out on 4 mm banana plugs. That makes it quick to hook a bus up to an oscilloscope or other test and measurement equipment.
It has no termination resistors and works on CAN FD buses too. PEAK has sold a slightly modified version of the cable since the end of 2023.
Highlights
- 9-pin D-Sub socket wired to CiA 106
- CAN-High and CAN-Low on 4 mm banana plugs
- No termination resistors
- Usable on CAN FD buses
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEK-003011 |
| Connectors | 9-pin D-Sub socket (CiA 106) to 4 mm banana plugs |
| Signals | CAN-High, CAN-Low |
| Length | 2.0 m |
| Termination | None |
In the Box
- PCAN-Cable 3
It plugs into PEAK CAN interfaces such as the PCAN-USB FD. Other CAN cables: PCAN-Cable 1 & 2 and PCAN-Cable M12.
For quantities, lead time or a quote, contact Pertech.
