The MICSIG RCP series are Rogowski AC current probes with peak currents from 60 Apk to 12000 Apk, bandwidth up to 30 MHz and di/dt up to 70 kA/us. Coils come in four cross-sections, from 1.6 mm (XS) to 8.0 mm (L), so they reach transistor pins and busbars alike. Pertech, the exclusive MICSIG distributor in Israel, quotes in ILS with local invoicing, handles warranty in Israel and arranges calibration and repair.
RCP series highlights
- AC current up to 12000Apk
- Bandwidth up to 30MHz (XS-80 coils), low end down to 2Hz
- Peak di/dt up to 70kA/μs
- Coil isolation up to 10kVpk (L series)
- Nearly zero insertion impedance, minimal interference to the circuit under test
- Coil cross-section from 1.6mm (XS) to 8.0mm (L) for hard-to-reach parts
- Customizable coil cross-section diameter, perimeter and lead length
- Typical accuracy 2%
- Standard BNC interface, compatible with all oscilloscope brands
Models
| Model | Peak current | Bandwidth | Sensitivity |
|---|---|---|---|
| RCP60XS-80 | 60Apk | 70Hz-30MHz | 100mV/A |
| RCP120XS-80 | 120Apk | 34Hz-30MHz | 50mV/A |
| RCP300XS-80 | 300Apk | 10Hz-30MHz | 20mV/A |
| RCP600XS-80 | 600Apk | 8Hz-30MHz | 10mV/A |
| RCP1200XS-80 | 1200Apk | 5Hz-30MHz | 5mV/A |
| RCP3000XS-80 | 3000Apk | 4Hz-30MHz | 2mV/A |
| RCP6000XS-80 | 6000Apk | 4Hz-30MHz | 1mV/A |
| RCP12000XS-80 | 12000Apk | 2Hz-30MHz | 0.5mV/A |
| RCP300XS-200 | 300Apk | 14Hz-20MHz | 20mV/A |
| RCP600XS-200 | 600Apk | 7Hz-20MHz | 10mV/A |
| RCP1200XS-200 | 1200Apk | 5Hz-20MHz | 5mV/A |
| RCP6000XS-200 | 6000Apk | 3Hz-20MHz | 1mV/A |
| RCP120S-200 | 120Apk | 14Hz-25MHz | 50mV/A |
| RCP300S-200 | 300Apk | 7Hz-25MHz | 20mV/A |
| RCP600S-200 | 600Apk | 5Hz-25MHz | 10mV/A |
| RCP1200S-200 | 1200Apk | 5Hz-25MHz | 5mV/A |
| RCP3000S-200 | 3000Apk | 3Hz-25MHz | 2mV/A |
| RCP6000S-200 | 6000Apk | 2Hz-25MHz | 1mV/A |
| RCP6000S-700 | 6000Apk | 3Hz-10MHz | 1mV/A |
| RCP12000S-700 | 12000Apk | 2Hz-10MHz | 0.5mV/A |
| RCP120M-200 | 120Apk | 14Hz-25MHz | 50mV/A |
| RCP300M-200 | 300Apk | 7Hz-25MHz | 20mV/A |
| RCP600M-200 | 600Apk | 5Hz-25MHz | 10mV/A |
| RCP1200M-200 | 1200Apk | 5Hz-25MHz | 5mV/A |
| RCP3000M-200 | 3000Apk | 3Hz-25MHz | 2mV/A |
| RCP6000M-200 | 6000Apk | 2Hz-25MHz | 1mV/A |
| RCP6000M-700 | 6000Apk | 3Hz-10MHz | 1mV/A |
| RCP12000M-700 | 12000Apk | 2Hz-10MHz | 0.5mV/A |
| RCP600L-700 | 600Apk | 8Hz-10MHz | 10mV/A |
| RCP1200L-700 | 1200Apk | 6Hz-10MHz | 5mV/A |
| RCP3000L-700 | 3000Apk | 4Hz-10MHz | 2mV/A |
| RCP6000L-700 | 6000Apk | 3Hz-10MHz | 1mV/A |
| RCP12000L-700 | 12000Apk | 2Hz-10MHz | 0.5mV/A |
Where the RCP series fits
- Motor drive current and power quality in VSD, UPS or SMPS circuits
- Double-pulse testing of SiC and GaN MOSFET and IGBT pin currents
- Load current and high-order harmonic current in power electronics
- High frequency sinusoidal, pulsed or transient currents
- AC currents in 3-phase supply systems
- Power consumption in semiconductors
- 50/60Hz power frequency current
- Power converter development and diagnostics
Key Specifications
| Spec | Value |
|---|---|
| Peak current | 60Apk to 12000Apk |
| Bandwidth | 2Hz-10MHz to 70Hz-30MHz depending on model |
| Output sensitivity | 100mV/A (10X) to 0.5mV/A (2000X) |
| Peak di/dt | 4kA/μs to 70kA/μs |
| Coil cross-section diameter | 1.6mm (XS) / 3.0mm (S) / 4.5mm (M) / 8.0mm (L) |
| Coil circumference | 80mm (XS), 200mm (XS, S, M), 700mm (S, M, L) |
| Peak coil isolation voltage | 1.5kVpk (XS) / 3kVpk (S) / 5kVpk (M) / 10kVpk (L), coil part only |
| Accuracy (typical) | 2% |
| Cable length | 1.5m integrator to coil, customizable |
| Output impedance | 1MΩ |
| Power supply | DC 12V |
| Interface | Standard BNC |
MICSIG RCP series in Israel
Buy the RCP series from Pertech, the exclusive MICSIG distributor in Israel: quotes in ILS and local invoicing, warranty handled in Israel, calibration and repair arranged through Pertech, some models in stock in Israel, and technical support from Pertech engineers.
Frequently asked questions
What is the MICSIG RCP series?
The MICSIG RCP series are Rogowski AC current probes with peak currents from 60 Apk to 12000 Apk, bandwidth up to 30 MHz and di/dt up to 70 kA/us. Coils come in four cross-sections, from 1.6 mm (XS) to 8.0 mm (L), so they reach transistor pins and busbars alike.
Where can I buy the MICSIG RCP series in Israel?
From Pertech, the exclusive MICSIG distributor in Israel. Contact Pertech for a quote in ILS, availability and help choosing the model.
Who handles warranty and calibration in Israel?
Pertech handles MICSIG warranty in Israel: you return the unit to Pertech and Pertech deals with MICSIG. Pertech also arranges calibration and repair.
Does the RCP series work with any oscilloscope?
MICSIG specifies a standard BNC output for the RCP series, compatible with oscilloscopes from other brands as well as MICSIG’s own.
Can Pertech help me set it up?
Yes. Pertech engineers help with setup and application questions for MICSIG instruments bought through Pertech.
Related MICSIG products at Pertech
- MICSIG SigOFIT Gen 3 optical isolated probe
- MICSIG DP high-voltage differential probe
- MICSIG MHO6 12-bit oscilloscope
- MICSIG CP series
- MICSIG CP2100
- MICSIG ACP1000
- MICSIG products at Pertech
Need a quote for the MICSIG RCP series? Contact Pertech.
