Kvaser Memorator Light HS v2

The Kvaser Memorator Light HS v2 (EAN 73-30130-01058-1) is a single-channel CAN data logger for troubleshooting CAN-based systems, with no software setup needed before use. An autobaud function finds the bus bit rate, so it can be plugged into any high-speed CAN bus as it is. All traffic goes into a circular buffer that overwrites the oldest data, while a second buffer keeps the traffic around error frames. It is a logger only and does not act as a real-time PC interface. Pertech is the authorized Kvaser sales representative in Israel.

Memorator Light HS v2 highlights

• Autobaud detects the CAN bit rate, so no configuration is needed
• Always in silent mode, recording without disturbing the bus
• Fixed 1 GB internal memory
• Two FIFO buffers: one for all bus traffic, one for about 1000 messages before and after each error frame
• Built-in real time clock with battery backup
• 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
• LEDs show device status
• Kvaser Memorator Config Tool reads the log over USB into formats used by popular analysis tools, and clears the memory

Where the Memorator Light HS v2 fits

• Chasing intermittent faults by leaving a logger on the bus
• Capturing what happened on the bus just before and after an error frame
• Field service where a recorder must work without setup
• Simple, low-effort logging on any high-speed CAN bus