Kvaser DIN Rail S030-X11 Relay add-on

The Kvaser DIN Rail S030-X11 Relay add-on (EAN 73-30130-01067-3) adds eight normally open (N.O.) relays and eight digital inputs to the Kvaser DIN Rail SE410S-X10 base module; relays and inputs can be used independently, and both are controlled through the base unit. An SE410S-X10 is required for operation. A power LED shows the module state, each digital input has its own LED, and the module is protected against overheating, reversed polarity and supply surges. Mating connectors are not included; it takes FKCN 2,5/8-ST, FMC 1,5/5ST-3,5 and FMCD 1,5/2-ST-3,5 plugs. Pertech is the authorized Kvaser sales representative in Israel.

S030-X11 Relay highlights

• Eight N.O. relays and eight digital inputs, usable independently
• Controlled through the SE410S-X10 base module
• A status LED for each digital input, plus a power LED
• Thermal, reverse-polarity and supply surge protection
• IP20 module with a tool-free clip for DIN rail mounting
• 24 VDC supply from a Class 2 / SELV source

Where the S030-X11 Relay fits

• Switching external circuits from a CAN system built on the Kvaser DIN Rail SE410S-X10
• Combining relay outputs with digital status inputs in one module
• Control cabinets where tool-free mounting shortens installation
• Systems that also use the S010-X10 Digital or S020-X10 Analog add-ons, which attach to the same base module