Prodigy PGY-10BaseT1S is 10BASE-T1S protocol decode software that runs inside a Windows-based Tektronix oscilloscope. 10BASE-T1S is the multidrop automotive Ethernet bus that connects sensors to ECUs; its data is differential Manchester encoded and scrambled on a single twisted pair, which makes decoding by hand slow and error-prone. PGY-10BaseT1S decodes the captured waveform automatically, checks the FCS of every packet and links each packet to its waveform. Pertech is the authorized Prodigy distributor.
10BASE-T1S software highlights
- Decodes scrambled, differential Manchester encoded 10BASE-T1S signals
- FCS validation, with error packets shown in red
- Timestamp, packet type, source and destination IP address, and payload decode for each packet
- Detail view correlates each decoded packet with its waveform in a bus diagram
- Zoom and pan for close inspection of the physical layer
- CSV and TXT export and report generation
Where the 10BASE-T1S software earns its keep
- Bringing up 10BASE-T1S sensor networks in vehicles
- Correlating packet errors with the physical-layer waveform
- Checking FCS errors on a multidrop bus during integration
- Teams with a Tektronix oscilloscope who need 10BASE-T1S decode without a separate analyzer
Key Specifications
| Spec | Value |
|---|---|
| Model | PGY-10BaseT1S |
| Platform | Software running inside Windows-based Tektronix oscilloscopes |
| Signal | 10BASE-T1S, differential Manchester encoded, scrambled |
| Decode | Timestamp, packet type, IP source and destination, payload |
| Error check | FCS validation, errors highlighted |
| Views | Packet list, detail view with bus diagram |
| Export | CSV and TXT; reports |
Frequently asked questions
What is 10BASE-T1S?
10BASE-T1S is an automotive Ethernet interface for connecting sensors to ECUs over a multidrop bus on a single twisted pair, using differential Manchester encoding with scrambled data.
Why use decode software for 10BASE-T1S?
Because the data is both differential Manchester encoded and scrambled, decoding it by hand from a waveform is complex and slow. PGY-10BaseT1S decodes it automatically and validates each packet.
Which oscilloscopes does it run on?
It runs inside Tektronix oscilloscopes that have a Windows operating system.
Does it detect errors?
Yes. It validates the FCS of every packet and shows error packets in red, linked to their waveforms.
Where can I buy Prodigy 10BASE-T1S decode software in Israel?
Pertech is the authorized Prodigy distributor. Prodigy offers free online technical support and free software updates. Contact Pertech for a quote, a demo or help checking that your oscilloscope is supported.
Related Prodigy products at Pertech
- 100BaseT1 Automotive Ethernet Protocol Decode Software
- 100Base-T1 Automotive Ethernet Protocol Analyzer
- FlexRay Protocol Decode and SI Analysis Software
- Prodigy protocol analyzers at Pertech
Bringing up an automotive Ethernet network? Contact Pertech for a quote, a demo or help choosing the right tool.
