DediProg SBK09 Backup Boot Flash Kit
BBF-8N module + SF100 programmer
Description
Swap-in serial flash emulation for boards using an SO8N (150mil) flash
The SBK09 pairs an SF100 programmer with DediProg’s BBF-8N Backup Boot Flash module, sized for the narrower SO8N (150mil) footprint. Connect via the included SO8 test clip onto the soldered flash, or via a 2.54mm BBF connector on boards that support it. As with the rest of the BBF line, it automatically disables the main serial flash while active and runs transparently to the application, letting engineers reduce time-to-market by testing and swapping firmware images without touching a soldering iron.
SO8N 150milmodule footprint
3.3V / 2.5VIC support
1 Mbpsdownload / 2 Mbps read
Highlights
- Serial flash emulator, fully transparent to the running application
- No hardware modification needed on most target boards
- Automatically disables the main onboard serial flash while active
- SO8 test clip or 2.54mm BBF connector, both included
- USB interface with built-in signal-conflict protection
Typical Applications
- Booting a failing computer or embedded board for diagnosis
- Recovering from a corrupted BIOS/firmware update
- Reducing time-to-market with fast, tool-free firmware image swaps
Key Specifications
| Included | SF100 programmer + USB cable + SF100 ISP cable (ISP1-CB) + universal adaptor (ISP-UADP-127) with BBF and 1.27mm cables + software CD; BBF-8N module + 2.54mm BBF cable + SO8 connection adaptor (BBF-CON-8) with SMT headers + 1.27mm 2×4 cable; BBF test clip (BBF-TC-8) |
|---|---|
| Module footprint | SO8N, 150mil |
| Supported IC voltage | 3.3V / 2.5V only |
| Speed | 1 Mbps download, 2 Mbps read |
Files & Media
- Manufacturer product page (DediProg)
- Datasheet: request current PDF from DediProg or attach the locally-hosted copy here
