Arium ECM-XDP3e is ASSET InterTech’s JTAG run-control probe for Intel targets with an XDP debug port. Together with SourcePoint for Intel it gives real-time debug straight out of reset for BIOS, UEFI, device drivers, OS kernels and embedded applications on Intel Core, Xeon and Atom platforms. It connects to the host over USB 2.0 or Gigabit Ethernet and covers platforms from Skylake onward; the earlier ECM-XDP3 serves older generations. Pertech is an ASSET InterTech distributor.
the ECM-XDP3e highlights
- Run control from reset with SourcePoint for Intel
- 60-pin XDP debug port connector; adapters for MIPI and SFF-26 headers
- Host connection over USB 2.0 or 10/100/1000BASE-T Ethernet
- JTAG TCK up to 28 MHz; downloads above 200 KB/s
- Multi-processor (SMP) support and access to all registers
- Trigger in and trigger out lines
- Small form factor and a built-in self-diagnostic test suite
Where the ECM-XDP3e fits
- BIOS and UEFI bring-up on Intel boards with an XDP header
- Shared lab setups: several probes on one floating SourcePoint license
- Remote debug of targets over Ethernet
Key Specifications
| Spec | Value |
|---|---|
| Model | Arium ECM-XDP3e |
| Target connector | 60-pin XDP; MIPI and SFF-26 via adapter |
| Processors | Intel Core, Xeon, Atom; platforms from Skylake onward |
| Host connection | USB 2.0; 10/100/1000BASE-T Ethernet |
| JTAG TCK | Up to 28 MHz |
| Download speed | More than 200 KB/s |
| Trigger in / out | 50 ohm, 155 ns / 125 ns maximum delay |
| Dimensions | 3.8 x 5.0 x 1.5 in (97 x 127 x 38 mm) |
| Operating environment | 0 to 31 °C, up to 85% humidity |
| Software | SourcePoint for Intel |
Frequently asked questions
What is the Arium ECM-XDP3e?
It is ASSET InterTech’s JTAG run-control probe that connects SourcePoint for Intel to the XDP debug port of an Intel target.
ECM-XDP3e or ECM-XDP3?
The ECM-XDP3e supports platforms from Skylake onward. The earlier ECM-XDP3 covers older generations.
What if my board has a MIPI or SFF-26 header?
The MIPI debug header has a different pinout from XDP, so it needs the MIPI adapter. Boards with a 26-pin small-form-factor header use the XDP-SFF-26 adapter.
Can several probes share one license?
Yes. A floating SourcePoint license on a license server can be shared between several probes.
Where can I buy the Arium ECM-XDP3e in Israel?
Pertech is an ASSET InterTech distributor in Israel. Contact Pertech for a quote, a demo or an evaluation, or to check that your platform and debug header are supported.
Related ASSET InterTech products at Pertech
Choosing a probe for your Intel board? Contact Pertech for a quote, a demo or an evaluation.
