SPI Analysis Application for Promira – Level 2 – TP601610
Monitor SPI up to 40 MHz with a Promira
This is the faster SPI monitoring licence for the Promira Serial Platform. Like Level 1, it watches the bus passively and decodes it live, but it follows SPI clocks up to 40 MHz.
It is a licence loaded onto a Promira you already have; there is no extra hardware. The capture streams to the PC over the Promira’s USB 2.0 or Gigabit Ethernet link. Total Phase released the new I2C and SPI analysis applications in 2025.
Highlights
- Passive SPI monitoring up to 40 MHz at 3.3 V
- Live decoding of packets and error codes
- Bit-level timing
- Capture streams to the PC over USB or Ethernet
- Licence for an existing Promira: no extra hardware
Software
- Data Center Software (free) shows the decoded capture live
- Promira Software API and Promira LabVIEW Driver (free), for your own test programs
- Windows 10/11, Linux and macOS 13 or later
Key Specifications
| Spec | Value |
|---|---|
| Part number | TP601610 |
| Runs on | Total Phase Promira Serial Platform |
| Bus | SPI single I/O, one chip select |
| Speed | up to 40 MHz at 3.3 V |
| Host link | USB 2.0 (Micro-B) or 10/100/1000 Ethernet, through the Promira |
| Delivery | Licence downloaded to the Promira |
In the Box
- Licence (no hardware)
The application needs a Promira Serial Platform. Other monitoring licences: I2C Analysis Application for Promira, SPI Analysis Application for Promira – Level 1. For master and slave work, see the Promira I2C, SPI and eSPI applications.
Total Phase notes that Promira firmware newer than v2.00 needs Promira API v1.60 or later.
For quantities, lead time or a quote, contact Pertech.
