SBK09 Backup Boot Flash Kit

description

SBK09 Backup Boot Flash Kit

The SBK09 Backup Boot Flash Kit is the most complete configuration in the SBK family, bundling the full range of sockets, adaptors, test clips and cables for backing up and restoring boot flash firmware across virtually any package type.

Highlights

  • Most complete SBK configuration: full socket, adaptor, clip and cable set
  • Purpose-built for boot flash backup, restore and duplication
  • Fast in-system programming workflow via DediProg SF software
  • Part of the SBK family alongside SBK01, SBK03 and SBK05

What are the key technical specifications of the SBK09 Backup Boot Flash Kit?

Spec Value
Programmer Included SF100 SPI NOR Flash Programmer + USB/ISP cable
Flash Module BBF-8N, SO8N (150mil) socket
Voltage Support 3.3V / 2.5V ICs only
Speed 1Mbps write / 2Mbps read
Use Case Transparent boot-flash emulator for BIOS recovery & firmware development

Files and media

Frequently Asked Questions

1 What types of flash memory does the SBK09 kit support?

The SBK09 Backup Boot Flash Kit is designed for backing up and restoring boot flash firmware across virtually any package type. It includes an SF100 SPI NOR Flash Programmer and specific sockets like BBF-8N and SO8N (150mil) for broad compatibility.

2 How does the SBK09 kit contribute to faster firmware development or BIOS recovery?

The SBK09 kit facilitates faster development and recovery through its fast in-system programming workflow. It is purpose-built for boot flash backup, restore, and duplication, serving as a transparent boot-flash emulator for efficient BIOS recovery and firmware development.

3 What makes the SBK09 the "most complete" SBK configuration?

The SBK09 is considered the most complete SBK configuration because it bundles a full range of sockets, adaptors, test clips, and cables. This comprehensive set allows for backing up and restoring boot flash firmware across virtually any package type.

4 Does the SBK09 support in-system programming, and what software is used?

Yes, the SBK09 supports fast in-system programming. This workflow is managed via the DediProg SF software, which is included with the kit along with the SF100 SPI NOR Flash Programmer.

upbtn
Skip to content