PEAK-DevPack Debug Adapter
Connect a hardware debugger to programmable PCAN hardware
The PEAK-DevPack Debug Adapter links a hardware debugger to the JTAG connector of the ARM-based, programmable PEAK products. Several connectors and three ribbon cables match the different JTAG headers on those devices.
A reset button restarts the device you are programming, so you do not have to unplug it during a debug session.
Highlights
- Hardware debugger to PCAN hardware JTAG
- Three ribbon cables for different header pitches
- Reset button for the target
- Covers six programmable PEAK products
Supported PEAK hardware
- PCAN-Router Pro FD (IPEH-002220, IPEH-002222)
- PCAN-Router FD (IPEH-002214, IPEH-002215)
- PCAN-MicroMod FD (IPEH-003080)
- PCAN-GPS (IPEH-002110)
- PCAN-GPS FD (IPEH-003110)
- PCAN-RS-232 FD (IPEH-003120)
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEK-003026 |
| Function | Adapter from a hardware debugger to the JTAG connector of PCAN hardware |
| Ribbon cables | 20-pin 2.54 mm, 20-pin 1.27 mm, 10-pin 2 mm |
| Controls | Reset button for the target |
In the Box
- PEAK-DevPack Debug Adapter
- Ribbon cable, 20-pin, 2.54 mm pitch
- Ribbon cable, 20-pin, 1.27 mm pitch
- Ribbon cable, 10-pin, 2 mm pitch
- Manual in PDF format
It supports the PCAN-Router Pro FD, PCAN-Router FD, PCAN-MicroMod FD, PCAN-GPS FD and PCAN-RS-232 FD.
For quantities, lead time or a quote, contact Pertech.
