PCAN-USB XL
Connect a PC to CAN XL, CAN FD and classic CAN over USB
PCAN-USB XL is a USB adapter for the newest CAN generation. Besides classic CAN and CAN FD it handles CAN XL, which allows up to 2048 data bytes per frame and data rates up to 20 Mbit/s, aimed at jobs like ECU flashing and software updates.
The CAN XL core is PEAK’s own FPGA design, validated against the C&S CAN XL evaluation board. The CAN side is galvanically isolated from the PC up to 500 V, and the compact plastic casing suits mobile use. PCAN-View 6 and PCAN-Basic 5 support CAN XL.
Highlights
- CAN CC, CAN FD and CAN XL in one adapter
- CAN XL data up to 20 Mbit/s via transceiver mode switch
- 1 us time stamp resolution
- Galvanic isolation up to 500 V
- TI TCAN6062V CAN SIC XL transceiver
- -40 to 85 C operating range
Software
- Device drivers for Windows 11 (x64) and 10 (x64), and for Linux
- PCAN-View 6 and PCAN-Basic 5, both with CAN XL support
- Programming interfaces for standard automotive protocols
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-005022 |
| Host interface | High-speed USB 2.0 (compatible with USB 3.0), USB powered |
| CAN standards | CAN CC (2.0), CAN FD and CAN XL (ISO 11898-1:2024), High-speed CAN ISO 11898-2:2024 |
| Bit rates | CAN 20 kbit/s to 1 Mbit/s; CAN FD data up to 8 Mbit/s; CAN XL data up to 8 Mbit/s (FD-compatible mode) or 20 Mbit/s (transceiver mode switch) |
| Connector | D-Sub 9-pin (CiA 106) |
| Isolation | Up to 500 V between CAN and USB |
| Termination | Via solder jumpers |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-USB XL in plastic casing
- Device drivers for Windows 11 (x64/ARM64), 10 (x64) and Linux
- PCAN-View CAN monitor for Windows
- PCAN-Basic API with CAN CC, CAN FD and CAN XL support
- Programming interfaces for standard automotive protocols
- Manual (PDF)
If you only need CAN FD, see the PCAN-USB FD and, for more channels, the PCAN-USB X6.
For quantities, lead time or a quote, contact Pertech.
