PCAN-PCI/104-Express
Classic CAN for PCI/104-Express embedded stacks
PCAN-PCI/104-Express connects CAN buses to a PCI/104-Express system over one PCIe lane. Up to four cards can be stacked in one system, and the buses connect through 9-pin D-Sub plugs on the supplied slot brackets.
The CAN controller is an SJA1000-compatible FPGA design. A solder jumper can put 5 V on the CAN connector, for example to feed an external bus converter. The card takes its power from the 5 V line only.
Highlights
- High-speed CAN for PCI/104-Express (PCIe x1)
- Up to four cards per system
- Opto-decoupled version with 500 V isolation
- SJA1000-compatible controller in FPGA
- -40 to 85 C operating range
Versions
- IPEH-003054: PCAN-PCI/104-Express Single Channel
- IPEH-003056: PCAN-PCI/104-Express Single Channel opto-decoupled
- PEAK no longer supplies the dual and four-channel opto-decoupled versions (IPEH-003057, IPEH-003058)
Software
- Device drivers for Windows 11 (x64) and 10 (x64), and for Linux
- PCAN-View, a CAN monitor for Windows
- PCAN-Basic, the API for writing your own CAN applications
- Programming interfaces for standard automotive protocols
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEH-003054, IPEH-003056 (opto-decoupled) |
| Bus | PCI/104-Express, 1 lane (x1), PC/104 form factor |
| CAN | High-speed CAN (ISO 11898-2), CAN 2.0A and 2.0B |
| Bit rates | 5 kbit/s to 1 Mbit/s |
| Transceiver | NXP PCA82C251 |
| Isolation | Up to 500 V per channel (opto-decoupled version) |
| Power | From the 5 V line only |
| Options | PCI-104 stack-through connector |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-PCI/104-Express card (version as ordered)
- Slot bracket with D-Sub connector
- Device drivers for Windows 11 (x64), 10 (x64) and Linux
- PCAN-View and PCAN-Basic
- Programming interfaces for standard automotive protocols
- Manual (PDF)
PEAK lists this product as end of life, with limited quantities left. Check with us before you design it into a new system. PEAK names the PCAN-PCI/104-Express FD as the alternative, with the same CAN behaviour.
For quantities, lead time or a quote, contact Pertech.
