PCAN-MicroMod Mix 3
Every PCAN-MicroMod input and output, in a casing with automotive connectors
The Mix 3 motherboard makes all the inputs and outputs of the PCAN-MicroMod available, which suits a wide range of automotive and industrial jobs. It comes in a plastic casing with Tyco automotive connectors and runs from a nominal 12 V supply.
Setup is done in the PCAN-MicroMod Configuration software over CAN, and CANopen firmware is available for the board.
Highlights
- 8 analog inputs, 0 to 4.1 V, 10-bit, 1 kHz
- 8 digital inputs, 4 of them frequency inputs up to 10 kHz
- 8 high-side outputs (350 mA), 4 also usable as low-side (700 mA)
- 4 PWM/frequency low-side outputs, 2 also usable as high-side (1.5 A)
- Plastic casing with Tyco automotive connectors, -40 to 85 C
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-002206 |
| CAN | High-speed CAN (ISO 11898-2), CAN 2.0A and 2.0B, 10 kbit/s to 1 Mbit/s |
| Configuration | PCAN-MicroMod Configuration for Windows, sent over CAN |
| Analog inputs | 8, 0 to 4.1 V (extendable with a voltage divider), 10-bit, 1 kHz, protected, low-pass |
| Digital inputs | 8, inverting Schmitt trigger, High 4.8 V and Low 1.2 V, pull-up or pull-down per input; 4 frequency inputs 0 to 10 kHz |
| Digital outputs | 8 high-side, 350 mA continuous, 500 mA short-circuit; 4 also low-side, 700 mA continuous, 1 A short-circuit |
| PWM/frequency outputs | 4 low-side, 350 mA continuous, 1 A short-circuit; 2 also high-side, 1.5 A continuous, 5 A short-circuit |
| Supply | 12 V DC nominal, 8 to 26 V possible |
| Casing | Plastic with Tyco automotive connectors |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-MicroMod motherboard in casing with mating connectors and crimp contacts
- PCAN-MicroMod plug-in module
- PCAN-MicroMod Configuration software for Windows
- Manual (PDF)
Setting up the module over CAN needs a PEAK CAN interface such as the PCAN-USB FD or the PCAN-USB.
For a CAN FD vehicle control unit, see the PCAN-MicroMod FD ECU.
For quantities, lead time or a quote, contact Pertech.
