PCAN-MicroMod Evaluation Kit
Everything you need to try out the PCAN-MicroMod and develop your own board
The PCAN-MicroMod is a plug-in module that gives an electronic circuit I/O functions and a CAN connection. This kit puts it on an evaluation board with switches, potentiometers, LEDs and screw terminals, so you can work with its inputs and outputs before you design your own carrier board.
The kit is complete: it includes a PCAN-USB interface, a terminated CAN cable and a power supply. The module is configured from Windows over CAN, and several modules on one bus can each get their own settings.
Highlights
- Evaluation board with PCAN-MicroMod plugged on
- PCAN-USB interface and 2 m terminated CAN cable included
- Switches, 4 potentiometers and LEDs to exercise the I/O
- Pick-offs and screw terminals for every input and output
- Serial interface for firmware updates
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-002079 |
| Outputs | Open-collector drivers for the digital outputs, CMOS PWM outputs |
| Inputs | Protected digital inputs with LEDs and switches; 4 potentiometers for the analog inputs; low-pass and divider for voltages above 5 V |
| CAN | Optional low-speed CAN transceiver on the board |
| Firmware | Serial interface for updates |
| Configuration | PCAN-MicroMod Configuration for Windows, over CAN |
| Operating temperature | 0 to 85 C |
| Size | 100 x 100 mm |
In the Box
- PCAN-MicroMod Evaluation Board
- PCAN-MicroMod plug-in module
- Power supply unit
- PCAN-USB interface
- 2 m CAN cable with termination
- PCAN-MicroMod Configuration software for Windows
- Manual and schematic (PDF)
The included interface is the PCAN-USB. For new CAN FD designs, see the PCAN-MicroMod FD Evaluation Board.
For quantities, lead time or a quote, contact Pertech.
