PCAN-MicroMod Digital 1 & 2

PCAN-MicroMod Digital 1 & 2 (PEAK-System)
description

PCAN-MicroMod Digital 1 & 2

Protected digital I/O over CAN, with low-side or high-side outputs

The Digital 1 and Digital 2 motherboards house a PCAN-MicroMod in an aluminium casing with spring terminals, protected inputs and outputs, and a wide supply range. They cover general digital switching and sensing tasks on a CAN bus.

The two versions differ in their outputs: Digital 1 switches loads on the low side and Digital 2 on the high side. Both are set up in the PCAN-MicroMod Configuration software, and CANopen firmware is available as well.

Highlights

  • 8 digital inputs, pull-up or pull-down per group of inputs
  • 4 of the inputs also usable as frequency inputs for counting or fast state changes
  • 4 switched outputs: low-side (Digital 1) or high-side (Digital 2)
  • 1 fast low-side frequency output up to 10 kHz
  • Short-circuit-protected outputs, aluminium casing, -40 to 85 C

Versions

  • IPEH-002200: PCAN-MicroMod Digital 1, 4 low-side switches, max. 45 V, 0.35 A
  • IPEH-002201: PCAN-MicroMod Digital 2, 4 high-side switches, max. 26 V, 1.1 A

Key Specifications

Spec Value
Order numbers IPEH-002200 (Digital 1), IPEH-002201 (Digital 2)
CAN High-speed CAN (ISO 11898-2), CAN 2.0A and 2.0B, 10 kbit/s to 1 Mbit/s
Configuration PCAN-MicroMod Configuration for Windows, sent over CAN
Digital inputs 8, inverting Schmitt trigger, thresholds High 4.8 V and Low 1.2 V, low-pass, pull-up or pull-down in 3 groups
Digital outputs 4 low-side or high-side switches, plus 1 fast low-side switch (max. 55 V, 0.75 A, up to 10 kHz)
Supply 8 to 26 V
Casing Aluminium with spring terminals; DIN rail fixing optional
Operating temperature -40 to 85 C

In the Box

  • PCAN-MicroMod motherboard in casing with mating connectors (Phoenix Contact FK-MCP 1,5/10-ST-3,81, 1851122), Digital 1 or Digital 2 as ordered
  • PCAN-MicroMod plug-in module
  • PCAN-MicroMod Configuration software for Windows
  • Manual (PDF)

Setting up the module over CAN needs a PEAK CAN interface such as the PCAN-USB FD or the PCAN-USB.

The CAN FD counterpart is the PCAN-MicroMod FD Digital 1&2.

For quantities, lead time or a quote, contact Pertech.

Files and media

upbtn
Skip to content