PCAN-LIN
Exchange data between LIN, CAN and RS-232 nodes
PCAN-LIN is a gateway module in a plastic casing that lets LIN, CAN and serial devices talk to each other. Its firmware routes data between RS-232 and LIN, CAN and LIN, and RS-232 and CAN, in both directions.
With the PCAN-LIN Config software you choose the mode. As LIN master, for example, it polls LIN nodes and passes their data to CAN, to the serial port or to both, optionally with an ID offset. It can also act as a LIN slave or simulate slaves whose data you change over CAN.
Highlights
- Gateway between RS-232, CAN and LIN
- LIN master or slave, LIN 1.x and 2.x frames
- LIN slave simulation, data changed via CAN
- LIN ID scheduler list
- Opto-decoupled version with 1 kV isolation
- 9 to 30 V supply, -40 to 85 C
Versions
- IPEH-002025: PCAN-LIN High-speed CAN
- IPEH-002029: PCAN-LIN High-speed CAN opto-decoupled
- The Low-speed CAN version (IPEH-002028) is no longer made
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEH-002025, IPEH-002029 (opto-decoupled) |
| CAN | High-speed CAN (ISO 11898-2), CAN 2.0 A/B, up to 1 Mbit/s |
| LIN | 1 to 20 kbit/s, LIN 1.x and 2.x, master or slave |
| Routing | RS-232 to LIN, CAN to LIN, RS-232 to CAN (limited bandwidth) |
| Isolation | Up to 1 kV between RS-232 and CAN/LIN (opto-decoupled version) |
| Supply | 9 to 30 V |
| Operating temperature | -40 to 85 C |
In the Box
- PCAN-LIN in plastic casing (version as ordered)
- PCAN-LIN Config, configuration and monitoring tool for Windows 11 (x64/ARM64) and 10 (x64)
- Manual (PDF)
To wire the module, see the LIN Connection Cable for PCAN-LIN. For LIN on a PC, see the PLIN-USB.
For quantities, lead time or a quote, contact Pertech.
