PCAN-Diag FD J1939 Add-in
Read J1939 traffic on the PCAN-Diag FD in plain terms
This add-in teaches the PCAN-Diag FD handheld to speak SAE J1939, the CAN protocol used in trucks, buses and other utility vehicles. Traffic on the bus is decoded against the built-in J1939 database and shown as parameter groups and parameters instead of raw bytes.
It also reassembles multi-packet messages, follows address claiming and shows diagnostic messages and trouble codes. The add-in is a licence file bound to one device, so you can add it to a PCAN-Diag FD you already own.
Highlights
- SAE J1939 decoding by PG and SP definitions
- Full J1939 database included
- Up to 20 custom PGs
- Multi-packet messages up to 1,785 bytes
- Address claiming support
- DM and DTC diagnostic data display
Ordering
- IPES-004069: licence for the J1939 Add-in, with database updates for 2 years
- IPES-004069-Ext: extends the database updates by another 2 years
- For a unit you already own, give us its serial number with the order. It is on the sticker under the device or in its support menu.
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPES-004069 |
| Runs on | PCAN-Diag FD |
| Protocol | SAE J1939 |
| Custom PGs | Up to 20 |
| Multi-packet payload | Up to 1,785 bytes |
| Licence | Device-bound licence file |
| Database updates | 2 years from purchase, extendable |
In the Box
- Licence file to activate the J1939 Add-in
- J1939 database updates for 2 years
- Manual (PDF)
The add-in needs a PCAN-Diag FD. For J1939 on the PC, see the PCAN-Explorer 7 J1939 Add-in.
For quantities, lead time or a quote, contact Pertech.
