The Kvaser Leaf v3 OBD-II (EAN 73-30130-01430-5) is a single-channel USB interface that ends in a 16-pin OBD-II (J1962) connector, giving a PC direct access to a vehicle’s diagnostic port and the ECU data behind it. Diagnostic software can read trouble codes, engine performance, fuel efficiency and emissions data, and system error codes over CAN or CAN FD. It is built to serve as a Vehicle Communication Interface (VCI) in development, production, after-sales and repair work. Pertech is the authorized Kvaser sales representative in Israel.
Leaf v3 OBD-II highlights
- 16-pin OBD-II connector with extra strong strain relief
- CAN FD up to 8 Mbit/s, with 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
- Up to 20,000 messages per second, timestamped at 50 µs resolution
- Galvanic isolation, powered through the USB Type-A connector
- Silent mode for analysis tools that must not disturb the bus
- Runs applications written for other Kvaser CAN hardware through the free CANlib SDK
- J2534 and RP1210A APIs, plus SocketCAN support
- Free Kvaser CanKing 7 analysis software
Where the Leaf v3 OBD-II fits
- Reading DTCs and ECU data through a vehicle’s OBD-II port
- Vehicle Communication Interface for production line testing
- After-sales service and repair workshops
- Developing diagnostic software on J2534 or RP1210A
Key Specifications
| Spec | Value |
|---|---|
| Model | Kvaser Leaf v3 OBD-II |
| EAN | 73-30130-01430-5 |
| Channels | 1 |
| PC interface | USB 2.0, Type-A |
| Vehicle connector | 16-pin OBD-II (J1962) |
| CAN bit rate | 20 to 1000 kbit/s |
| CAN FD bit rate | Up to 8 Mbit/s |
| Messages per second | 20,000 receive, 20,000 send |
| Timestamp resolution | 50 µs |
| Error frame detection | Yes |
| Galvanic isolation | Yes |
| Silent mode | Yes |
| IP class | IP40 |
| Operating temperature | -20 °C to 70 °C |
| Dimensions (L x W x H) | 165 x 35 x 17 mm |
| Weight | 130 g |
| Operating systems | Windows 10, Windows 11, Linux |
| Compliance | CE, FCC |
