Kvaser Leaf v3 CB

The Kvaser Leaf v3 CB (EAN 73-30130-01532-6) is the Kvaser Leaf v3 single-channel USB to CAN FD interface delivered as a bare circuit board, with no housing, so you can mount it inside your own enclosure or equipment. The electronics match the boxed Leaf v3 in the numbers that matter: CAN FD up to 8 Mbit/s, 20,000 messages per second and 50 µs timestamps. Where the standard Leaf v3 ends in a D-SUB 9 cable, the CB brings the bus out on a 6-pin Molex connector, and extra soldering options let you fit a different connector or wire it straight into a custom PC application. It also keeps the outline, mounting holes and LED positions of the older Kvaser Leaf Light HS v2 CB (00733-8), so existing designs can move to CAN FD without a new mechanical layout. Pertech is the authorized Kvaser sales representative in Israel.

Leaf v3 CB highlights

• Board-level version of the Leaf v3, 100 x 27 x 5 mm and 10 g
• 6-pin Molex connector, with soldering options for alternative connectors
• Drop-in mechanical replacement for the Leaf Light HS v2 CB: same size, mounting holes and LED positions
• CAN FD up to 8 Mbit/s and CAN from 20 kbit/s to 1 Mbit/s, with 11-bit and 29-bit identifiers
• Up to 20,000 messages per second, timestamped at 50 µs resolution
• Galvanic isolation, powered from the USB connection
• Silent mode for listening to the bus without transmitting
• Free Kvaser CanKing 7 software and CANlib SDK, plus SocketCAN support

Where the Leaf v3 CB fits

• OEM equipment that needs a CAN FD interface inside its own housing
• Upgrading products built around the Leaf Light HS v2 CB
• Custom test fixtures and production test stations
• Installations with no room for a housed USB interface