Kvaser DIN Rail S020-X10 Analog add-on

The Kvaser DIN Rail S020-X10 Analog add-on (EAN 73-30130-01066-6) gives the Kvaser DIN Rail SE410S-X10 base module four analog inputs and four analog outputs, controlled through the base unit. The inputs have a fixed 0 to 10 V range with 12-bit resolution. The module needs an SE410S-X10 to operate, carries a power LED for status, and is protected against overheating, reversed polarity and supply surges. Mating connectors are not included; the module uses FMC 1,5/8-ST-3,5 and FMCD 1,5/-ST-3,5 plugs (as Kvaser lists them). Pertech is the authorized Kvaser sales representative in Israel.

S020-X10 Analog highlights

• Four analog inputs and four analog outputs, controlled through the SE410S-X10 base module
• Fixed 0 to 10 V input range at 12-bit resolution
• Power LED for module status
• Thermal, reverse-polarity and supply surge protection
• IP20 module with a tool-free clip for DIN rail mounting
• 24 VDC supply from a Class 2 / SELV source

Where the S020-X10 Analog fits

• Bringing 0 to 10 V sensor signals into a CAN system built on the Kvaser DIN Rail SE410S-X10
• Generating analog set points from the same DIN rail stack
• Control cabinets where tool-free mounting shortens installation
• Systems that also use the S010-X10 Digital or S030-X11 Relay add-ons, which attach to the same base module