Kvaser Air Bridge M12 Starter Collection

The Kvaser Air Bridge M12 Starter Collection is a bundle with everything needed to build and commission a wireless CAN bridge on the Kvaser Air Bridge M12 (one to any). It holds two Air Bridge M12 units, one Kvaser Leaf v3 USB to CAN interface, one Kvaser T-Cannector v2 CAN hub and one Air Bridge Programming Cable M12. During setup the programming cable joins an Air Bridge M12 to the T-Cannector, which powers the unit, while the Leaf v3 plugs into the hub on its D-SUB side and into the PC over USB. From there the free Kvaser Air Bridge Utility CLI configures the units and updates their firmware. Kvaser lists this collection as a bundle without a separate EAN. Pertech is the authorized Kvaser sales representative in Israel.

Starter Collection highlights

• Two Kvaser Air Bridge M12 (one to any) units (EAN 73-30130-01494-7), enough for one complete bridge
• One Kvaser Leaf v3 (EAN 73-30130-01424-4) to reach the CAN side from a PC over USB
• One Kvaser T-Cannector v2 CAN hub (EAN 73-30130-00776-5) that powers the Air Bridge during configuration
• One Kvaser Air Bridge Programming Cable M12 (EAN 73-30130-01588-3) to bring the M12 connector to D-SUB
• Setup and firmware updates through the free Kvaser Air Bridge Utility CLI
• The Utility CLI also handles other Air Bridge variants

Where the Starter Collection fits

• First-time Air Bridge M12 users who want a working bench setup in one order
• Teams that need to configure and update Air Bridge M12 units before installing them
• Engineers without a Kvaser USB to CAN interface on hand
• Pilot projects that replace a CAN cable with a radio link