Ixxat CAN Adapter Screw Terminals to D-Sub 9
Give the PCAN-Repeater a standard D-Sub CAN connector
This Ixxat adapter turns the 4-pin CAN screw terminal of the PCAN-Repeater into a standard 9-pin D-Sub connector. You can then use ordinary PEAK CAN cables between the repeater and a PC CAN interface.
The adapter works on CAN and CAN FD buses. It is intended for the PCAN-Repeater only; other PEAK devices in DIN rail housings use the PCAN-Adapter D-Sub for DR Products.
Highlights
- 4-pin Phoenix screw terminal to 9-pin D-Sub
- D-Sub wired to CiA 106
- No termination
- Usable on CAN FD buses
Key Specifications
| Spec | Value |
|---|---|
| Order number | 1.04.0074.03000 |
| Connectors | 4-pin screw terminal block (Phoenix) to 9-pin D-Sub (CiA 106) |
| For | PCAN-Repeater |
| Termination | None |
In the Box
- Ixxat CAN adapter screw terminals to D-Sub 9
It is made for the PCAN-Repeater. For the PCAN-Repeater DR, PCAN-Router DR and the Ethernet gateways, use the PCAN-Adapter D-Sub for DR Products.
For quantities, lead time or a quote, contact Pertech.
