Kvaser USBcan Light 2xHS

The Kvaser USBcan Light 2xHS (EAN 73-30130-00714-7) is an entry-level way to put two high speed CAN buses on a single USB port of a PC or laptop. The USB plug and the two D-SUB 9 CAN connectors each sit at the end of their own flexible lead, which helps when the ECU you need to reach is buried somewhere awkward in a vehicle. Galvanic isolation is standard, and the housing is only slightly bigger than the single-channel Leaf Light v2. Like every Kvaser interface it runs on the common CANlib API, so code written for other Kvaser hardware works without changes. Pertech is the authorized Kvaser sales representative in Israel.

USBcan Light 2xHS highlights

• Two high speed CAN channels (ISO 11898-2) from one USB 2.0 connection
• CAN from 40 kbit/s to 1 Mbit/s, with 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
• Up to 8,000 messages per second, timestamped at 100 µs resolution
• Galvanic isolation as standard
• Separate flexible leads for the USB and both D-SUB 9 connectors
• Works with J1939, CANopen, NMEA 2000 and DeviceNet networks
• Free Kvaser CanKing 7 software and CANlib SDK, plus SocketCAN, J2534 and RP1210 support

Where the USBcan Light 2xHS fits

• Monitoring and logging two CAN buses at once from a laptop
• Bench work on ECUs that are hard to reach
• Cost-sensitive test setups that need two classic CAN channels
• Gateway testing between two CAN networks