Kvaser Leaf v3 J1939-13 Type II

The Kvaser Leaf v3 J1939-13 Type II (EAN 73-30130-01426-8) is a single-channel USB interface for connecting a PC to the diagnostic port of a heavy-duty vehicle, where it monitors and transmits CAN and CAN FD traffic. It is the Kvaser Leaf v3 with the D-SUB 9 replaced by a 9-pin J1939-13 Type II connector, the plug used for diagnostics on heavy-duty vehicles. The green Type II connector handles 250 or 500 kbit/s networks and also mates with older black Type I ports, which are limited to 250 kbit/s. Pertech is the authorized Kvaser sales representative in Israel.

Leaf v3 J1939-13 highlights

• 9-pin J1939-13 Type II connector with extra strong strain relief
• Works with Type II (250 or 500 kbit/s) and older Type I (250 kbit/s) vehicle ports
• CAN FD up to 8 Mbit/s, with 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
• Up to 20,000 messages per second, timestamped at 50 µs resolution
• Galvanic isolation, powered through the USB Type-A connector
• Silent mode for analysis tools that must not disturb the bus
• J2534 and RP1210A APIs, CANlib SDK and SocketCAN support
• Free Kvaser CanKing 7 analysis software

Where the Leaf v3 J1939-13 fits

• Diagnostics on trucks, buses and heavy machinery over J1939
• Developing and testing J1939 ECUs and diagnostic software
• Fleet service and workshop tools built on RP1210A or J2534
• Monitoring heavy-vehicle networks in the field