PCAN-MicroMod FD Evaluation Board
Develop and test CAN FD I/O circuits around the PCAN-MicroMod FD
This evaluation board carries a PCAN-MicroMod FD and brings all its resources out to pick-offs, screw terminals, switches and potentiometers. Use it to design and test your own circuits with CAN and I/O, to check configurations, or to teach CAN and CAN FD.
The configuration is made in the supplied Windows software and sent to the module over CAN. A CANopen firmware licence for one module is included. The Evaluation Kit version adds the CAN interface and cable you need to get started.
Highlights
- PCAN-MicroMod FD plugged on, all pins on pick-offs
- DIP switches, 4 potentiometers and LEDs to exercise the I/O
- Firmware upload over CAN, USB or RS-232
- Soldering fields for your own extra circuitry
- CANopen licence for one PCAN-MicroMod FD included
- Kit version adds PCAN-USB FD and a terminated CAN cable
Versions
- IPEH-003081: PCAN-MicroMod FD Evaluation Board
- IPEH-003082: PCAN-MicroMod FD Evaluation Kit (the board plus a PCAN-USB FD interface and a 2 m terminated CAN cable)
Software
- PCAN-MicroMod FD Configuration for Windows: map I/O to CAN IDs and add function blocks that process the data
- Windows development package with GCC ARM Embedded and programming examples
- PEAK-Flash for Windows 11 (x64/ARM64) and Windows 10 (x64), for firmware updates
Key Specifications
| Spec | Value |
|---|---|
| Order numbers | IPEH-003081 (Board), IPEH-003082 (Kit) |
| CAN | D-Sub 9-pin (CiA 106); switchable 120 Ohm termination |
| I/O access | Screw terminals for all I/O; low-side switches on the digital outputs; protected digital inputs |
| Serial | RS-232 at V.24 levels for direct access to the microcontroller |
| Module ID | 4-bit rotary coding switch |
| Supply | 5 V via Micro-USB or barrel connector |
| Operating temperature | 0 to 70 C |
| Size | 100 x 102 mm, rubber feet |
In the Box
- PCAN-MicroMod FD
- PCAN-MicroMod FD Evaluation Board
- USB cable
- PCAN-MicroMod FD Configuration for Windows
- CANopen licence for one PCAN-MicroMod FD
- Windows development package with GCC ARM Embedded and examples
- PEAK-Flash for Windows
- Manual and schematic (PDF)
- Kit only: PCAN-USB FD and 2 m CAN cable with termination
The board is built for the PCAN-MicroMod FD; the kit includes the PCAN-USB FD.
For quantities, lead time or a quote, contact Pertech.
