PCAN-Repeater
CAN CC and CAN FD repeater with 5 kV isolation, no setup needed
The PCAN-Repeater has two CAN ports isolated by 5 kV from each other and from the power supply. It handles both CAN CC and CAN FD, from 14 kbit/s up to 8 Mbit/s in the CAN FD data phase, and sits in a DIN rail housing rated for industrial temperatures.
There is nothing to configure. The repeater passes every message and error frame 1:1 between the ports, refreshes the signal quality and looks like a piece of cable to the bus. If one segment fails, for example through a short circuit or a node with a broken transceiver, it disconnects that segment and reconnects it once the fault is gone.
It isolates two bus segments and lets you build long stub lines, even with several nodes on them. It does not make a bus longer: its transit delay of about 175 ns (about 35 m of cable) reduces the total length allowed at a given bit rate.
Highlights
- Two isolated High-speed CAN ports, CAN CC and CAN FD
- CAN FD data phase up to 8 Mbit/s
- Isolation up to 5 kV (IEC 60601-1)
- Auto-disconnect of a faulty segment, auto-reconnect
- Termination switches on the front
- No configuration needed
Key Specifications
| Spec | Value |
|---|---|
| Order number | IPEH-004039 |
| CAN | 2 x High-speed CAN (ISO 11898-2), CAN CC and CAN FD (ISO and non-ISO) |
| Bit rates | CAN 14 kbit/s to 1 Mbit/s; CAN FD data 14 kbit/s to 8 Mbit/s |
| Transceiver | TI TCAN1044 or compatible |
| Isolation | Up to 5 kV (IEC 60601-1), port to port and CAN to supply |
| Transit delay | About 175 ns (about 35 m of cable) |
| Connections | 4-pin CAN and 3-pin supply push-in spring terminals (Phoenix) |
| Supply | 10 to 30 V |
| Operating temperature | -40 to +85 C |
In the Box
- PCAN-Repeater in DIN rail plastic casing
- 2 x 4-pin mating connectors for CAN (Phoenix Contact FKC 2,5/ 4-ST GY – 1756260)
- 1 x 3-pin mating connector for the supply (Phoenix Contact FKC 2,5/ 3-ST GY – 1857772)
- Manual in PDF format
- Printed quick start guide
For D-Sub cabling, add the Ixxat CAN Adapter Screw Terminals to D-Sub 9. A CAN CC model is the PCAN-Repeater DR.
For quantities, lead time or a quote, contact Pertech.
