NuProg-E2 Engineering Universal Programmer
Replaces the StarProg-U
The NuProg-E2 is DediProg’s universal engineering programmer. It programs most IC types on the market, including UFS, eMMC, MCU, CPLD, FPGA, SPI NOR and SPI NAND, parallel NOR and NAND, and EEPROM, in packages from CSP and BGA to QFN, QFP, SOP, TSOP, SSOP, PLCC and DIP.
It is built on an FPGA kernel for high programming speed and connects over SuperSpeed USB 3.0, so you can stay focused on development and application analysis. Its projects and socket adaptors are shared with the NuProgPlus production programmers, so work moves from the lab to the line without redoing it. It replaced the StarProg-U, which DediProg moved to end of life on 11 April 2023.
Highlights
- FPGA kernel architecture for high-speed programming
- UFS v2.0 to v4.0: descriptors, attributes and flags, plus LUN configuration
- eMMC: user area, Boot1/2, extended CSD, RPMB, GPP1-4 and enhanced mode
- Binary, Intel Hex, Motorola S19 and MCU-specific file formats
- Projects and socket adaptors are shared with the NuProgPlus series
- Regular software updates
Good to Know
- The NuProg-E2 uses only the upper socket of a NuProgPlus dual socket adaptor
- Socket adaptors for the older NuProg-E do not fit the NuProg-E2
- In-system (on-board) programming is not available on the NuProg-E2
- For a stable connection, plug in the power adapter first, then the USB cable
- Engineering mode gives access to advanced features for development and repair work
Key Specifications
| Spec | Value |
|---|---|
| Programmer | Single-site engineering universal programmer |
| Supported ICs | UFS, eMMC, MCU, CPLD, FPGA, SPI NOR, SPI NAND, parallel NOR and NAND, EEPROM |
| Packages | CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP and more |
| UFS | v2.0, v2.1, v3.0, v3.1, v4.0 |
| eMMC | User area, Boot1/2, ExtCSD, RPMB, GPP1-4, enhanced mode |
| Host interface | SuperSpeed USB 3.0; USB 2.0 with the power adapter connected |
| Operating system | Windows 7, 8, 8.1, 10, 11 |
| Replaces | StarProg-U (end of life 11 April 2023) |
In the Box
- NuProg-E2 programmer
- USB 3.0 cable
- 5V/1A power supply (100-240V AC)
- DP socket press plate
Socket adaptors are ordered separately for each IC package. Tell us the part number and we will match the adaptor.
Options: the HPF-NuProg-E2 hand press fixture, or the whole set as the NuProg-E2 Manual Kit.
Datasheet: NuProg-E2 flyer (PDF).
For the software, the user manual or a quote, contact Pertech.
