Pertech Embedded Solutions logo

SQG30-AC – 3.0 GHz Low Impedance 10:1 Passive AC Probe

Sensepeek SQG30-AC - 3.0 GHz Low Impedance 10:1 Passive AC Probe (PCBITE-7010)
description

New

The SQG30-AC is a 3 GHz AC-coupled, low-impedance (500 ohm) 10:1 passive probe for instruments with a 50 ohm input – oscilloscopes, sampling scopes, network, spectrum and modulation analyzers, receivers and power meters. Part of the Sensepeek SQG series of high-frequency handsfree probes (1.5 – 6.0 GHz), it mounts on the PCBite base plate for stable handsfree measurements and is insulated for handheld use. AC coupling makes it a good fit for DC-biased high-speed data (USB, HDMI, SATA, ECL/PECL) and supply ripple and noise. Supplied in a storage case.

Part number: PCBITE-7010

Files and media

What's In The Box

  • 1x SQG30-AC probe with spring tipped test needle
  • 1x SQ probe holder for handsfree measurement
  • 1x Set of colour-coded cable holders (4 colours)
  • 1x Dual ground spring (handsfree, rated bandwidth)
  • 1x Standard ground spring (handheld, rated bandwidth)
  • 1x Probe tip protection
  • 1x Extra test needle
  • 1x SMA wrench (no torque control)
  • 1x Storage case

Specifications

Part numberPCBITE-7010
Bandwidth3.0 GHz
CouplingAC
Attenuation10:1 passive
Instrument input impedance50 ohm
Probe tip impedance500 ohm
Tip capacitance< 1.31 pF
Usable data rate> 6 Gbps
Flat response+/-0.5 dB, 1 kHz to 2.6 GHz
GroundUp to 2 GHz with single GND; above 3 GHz with dual GND clip
Ground pitchDual needle 2.3 mm; single 6.5 mm
EAN7350145660489
upbtn
Skip to content