What are the core capabilities of the TravelLogic 4000 series Logic Analyzer?

The TravelLogic 4000 series can operate in both Logic Analyzer Mode and Protocol Analyzer Mode, providing comprehensive capabilities for bus analysis and decodes. It is a PC-based tool designed for detailed digital signal measurement.

What are the key technical specifications of the TravelLogic Logic Analyzer?

The TravelLogic Logic Analyzer features a USB3.0 interface, 34 channels, 2 GHz Timing Analysis, and 250MHz State Analysis. It also includes a maximum of 8Gb memory for extensive data capture.

Which communication protocols does the TravelLogic Logic Analyzer support for analysis and decoding?

The TravelLogic Logic Analyzer supports a wide array of protocols for bus triggering, protocol analysis, and decoding. This includes common standards like I2C, SPI, UART, CAN, and USB PD, as well as specialized protocols such as MIPI I3C 1.1, eMMC 4.5, and Profibus, with over 100 bus decode options.

Can the TravelLogic Logic Analyzer be used for mixed-signal measurements?

Yes, the TravelLogic Logic Analyzer can be stacked with an Acute or another Digital Storage Oscilloscope (DSO) to form a Mixed Signal Oscilloscope (MSO). This configuration enables both digital and analog signal measurement.

Home » Acute Technology » TravelLogic Logic Analyzer

TravelLogic Logic Analyzer

What is the TravelLogic 4000 series and its capabilities?

TravelLogic 4000 series contains the ability to run in Logic Analyzer Mode and in Protocol Analyzer Mode for bus analysis and decodes.

PC-based

USB3.0 interface

34 channels

2 GHz Timing / 250MHz State Analysis

8Gb Memory (Max.)

Stacks with Acute or another DSO to form as an MSO

For Digital & Analog signal measurement : MSO (Mixed Signal Oscilloscope)

What are the key features and supported protocols of the TB3000?

Bus Trigger I : BiSS-C, CAN2.0B/CAN FD, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SPI, UART (RS232), USB PD 3.0

Bus Trigger II : DALI, LPC, Mini/Micro LED, PMBus, Profibus, SMBus, SVI2, USB1.1, …

Bus Trigger III : eMMC 4.5, eSPI, MII, RGMII, RMII, NAND Flash, SD 3.0 (SDIO 2.0), …

Protocol Analyzer I : BiSS-C, CAN2.0B/CAN FD, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SPI, UART (RS232), USB PD 3.0

Protocol Analyzer II : DALI, Mini/Micro LED, Profibus, SMBus, USB1.1, …

Protocol Analyzer III : eSPI, MII, RGMII, RMII, …

Bus Decode : CAN 2.0B/CAN FD, DP_Aux, eMMC 4.5, eSPI, I2C, I2S, MIPI DSI LP, MIPI I3C 1.1, NAND Flash, Profibus, SD 3.0 (SDIO 2.0), SPI, UART (RS232), … 100+

Files and media

contact us

site map

We'd like to hear from you

Frequently Asked Questions

1 What are the core capabilities of the TravelLogic 4000 series Logic Analyzer?: The TravelLogic 4000 series can operate in both Logic Analyzer Mode and Protocol Analyzer Mode, providing comprehensive capabilities for bus analysis and decodes. It is a PC-based tool designed for detailed digital signal measurement.
2 What are the key technical specifications of the TravelLogic Logic Analyzer?: The TravelLogic Logic Analyzer features a USB3.0 interface, 34 channels, 2 GHz Timing Analysis, and 250MHz State Analysis. It also includes a maximum of 8Gb memory for extensive data capture.
3 Which communication protocols does the TravelLogic Logic Analyzer support for analysis and decoding?: The TravelLogic Logic Analyzer supports a wide array of protocols for bus triggering, protocol analysis, and decoding. This includes common standards like I2C, SPI, UART, CAN, and USB PD, as well as specialized protocols such as MIPI I3C 1.1, eMMC 4.5, and Profibus, with over 100 bus decode options.
4 Can the TravelLogic Logic Analyzer be used for mixed-signal measurements?: Yes, the TravelLogic Logic Analyzer can be stacked with an Acute or another Digital Storage Oscilloscope (DSO) to form a Mixed Signal Oscilloscope (MSO). This configuration enables both digital and analog signal measurement.