Dediprog – SF100 SPI NOR Flash Programmer

description

SF100 SPI NOR Flash Programmer

  • What is the DediProg SF100 SPI NOR Flash Programmer?

    DediProg’s SF100 is a high speed “In System Programming” programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport.

     

    The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.

    What are the key features of the SF100 SPI NOR Flash Programmer?

    • USB Interface
    • Start button feature
    • Signal conflict protections
    • Update Serial Flash soldered on board with application powered or not
    • Control Application, controller reset and MOSFET isolation status
    • Update the internal Flash of Freescale MCU using the Ezport (MCF5223, MCF5221, MCF5213) or the external SPI Flash of Freescale MCU using the SBF interface (MCF5445, MCF5227)
    • Capable of handling two serial flash memories (new feature; provided in SF100 with serial number DP001325, firmware 2.0.4, software 2.0.37 and after)
    • Multi-Programmers Capability
    • Support Windows 2003 and above
    • Support both 32 bit or 64 bit OS
    • Support 1 CS pin

    Files and media

Files and media

contact us

site map

We'd like to hear from you

Frequently Asked Questions

1 What is the primary function of the Dediprog SF100 SPI NOR Flash Programmer?

The SF100 is a high-speed In-System Programming (ISP) tool designed to update SPI Flash memories directly soldered onto a board or to program Freescale MCUs via their Ezport or SBF interface. It is easily controlled by the DediProg Software through a USB connection.

2 What are the key technical highlights of the SF100 programmer?

Key features include a USB interface, a convenient Start button, signal conflict protections, and the ability to update serial flash both with the application powered or unpowered. It also supports controlling the application, controller reset, and MOSFET isolation status.

3 Which Freescale MCUs does the SF100 support for programming?

The SF100 supports programming the internal Flash of Freescale MCUs like MCF5223, MCF5221, and MCF5213 using the Ezport. It can also program the external SPI Flash of Freescale MCUs such as MCF5445 and MCF5227 via the SBF interface.

4 Can the SF100 handle multiple flash memories or be used in a multi-programmer setup?

Yes, the SF100 is capable of handling two serial flash memories simultaneously (for models with serial number DP001325 and after) and supports multi-programmer capability, allowing several units to operate together.

upbtn
Skip to content
WordPress Generative Engine Optimization (GEO) provided by LovedBy.ai.